not from the factory, that would be a customization
You will need an adapter to coveg the EGR crossover.
30 ft/lbs on a cast iron intake.
for a Chevy 350 enginge its 25 to 30 ft lbs. cast iron heads.
18436572 It should be cast on the factory intake manifold.
#1932 Mr Gasket will fit. Available at Autozone.
The cast of The Nightingale - 2010 includes: Liz Dapo as Housekeeper Janna Holley as Rebecca Adam Holley as Stanley Keifer
Rule of thumb is 575 lbs with a cast iron intake. 535 lbs with an aluminum intake. Give or take from that depending on accessories and bracket set up.
I would start at 20 ft lbs on alum. 25 on cast.
A cast iron Chevy 350 long block with the casting number 10243880 weighs 410 pounds. The engine will way even more once the intake and accessories are installed.
Most Chevy small blocks with cast iron intake and exhaust manifolds are about 550 lbs.
With cast iron heads it is 30 lb/ft. Tighten in a criss cross pattern.
your number one cylinder is on the front driverside of the engine it is also cast into the stock intake of most all V8's