0
What else can I help you with?
If an old 12 gauge Parker straight stock damascus has one flat hammer screw and one rounded screw which is correct?
Flat. Should be flush with the side of the hammer.
What are the types of screw drivers?
flat screw drivers,insulated screw drivers,stubby screw drivers,torx screw drivers,striking screw drivers,pokers screw drivers.
What are the different types of screw drivers?
flat screw drivers,insulated screw drivers,stubby screw drivers,torx screw drivers,striking screw drivers,pokers screw drivers.
What are the use of screwdriver?
To screw screws'!
What is the difference between a 6 screw and a 8 screw?
The main difference between a 6 screw and a 8 screw is their diameter. A 6 screw is smaller in diameter than a 8 screw.
How do you use screw numbers to determine the appropriate size for a screw?
To determine the appropriate size for a screw, you can use screw numbers which are based on the diameter and length of the screw. The higher the screw number, the larger the diameter and length of the screw. You can match the screw number to the size needed for your project by referring to a screw size chart.
What type of simple machine is a cap of a pickle jar?
Screw
What is a screw clamp and how is it used?
A screw clamp is something that is used to put a screw in place. There are hand screw clamps where you use your hand to tighten the screw.
How do you replace lead in Parker jotter mechanical pencil?
To replace the lead in a Parker Jotter mechanical pencil, follow these steps: Unscrew the tip of the pencil to access the lead chamber. Remove any remaining lead fragments from the chamber. Insert a new lead refill into the chamber, ensuring it is securely in place. Screw the tip back on the pencil and test to make sure the lead advances properly.
What is screw gripping screw driver?
A screw driver that grips tight screws instead of slipping and damaging the screw.
What is a sentence for have a screw loose?
I think we have a screw loose on the swing.You have a screw loose in your head.
How can I determine the size of a screw?
To determine the size of a screw, you can measure the diameter of the screw thread using a caliper or a screw gauge. You can also refer to the screw's packaging or consult a screw size chart for reference.
