The Villager does not have an interference engine.
2000 Mercury sport villager with 3.3liter what does the rod caps torque at.
Bottom front of engine.
Screwed into the lower intake manifold right at the center of the engine in front.
Yes.
It's mounted low and to the rear (right side) of engine. You need to remove the splash shield and access it from under the car.
The crankshaft position sensor is at the rear of the engine where it joins with the transmission bellhousing. It is at the left (front) side, not far from the starter.
The trim pieces are different.
16 inch on my 2002 sport (aluminum alloy wheels)
Under the dash near the fusebox.
Both oxygen sensors are in the exhaust pipe, one under the front of the engine, one roughly under the passenger seat are.
In the tube between the air filter box and the rubber intake boot.
The marks are on the cam and crank sprockets, and on the timing belt. They all must match.