Galvanometer is similiar to ammeter which is used to detect small current through it
whereas a voltmeter measures the potential difference in a cicuit..
It can be used to form ammeter measuring the current intensity , Voltmeter measuring the potential difference , ohmmeter measuring the resistance.
A multimeter measures electrical properties such as AC or DC voltage, current, and resistance. Rather than have separate meters, a multimeter combines a voltmeter, an ammeter, and an ohmmeter. The two main kinds of a multimeter are analog and digital. A voltmeter measures the potential difference (voltage) between two points. the voltmeter only measures volts.
Electrodynamometer: An instrument that measures large amount of electric current by indicating the strength of repulsion or attraction between the magnetic fields of two sets of coils, one fixed and one movable. whereas, Galvanometer: An instrument for detecting and measuring small electric currents.
The purpose of a voltmeter is to measure the number of volts contained in a wire. If the number of volts is too high then the wire can't hold in all of the volts and you get shocked. ================ Beautiful. A voltmeter is used to measure the potential difference between two points, usually but not always in an electronic circuit comprised of many components.
Electric force is the attractive or repulsive force between two charged particles. The potential difference between two points can be measured with a Voltmeter.
What is the difference between the construction of a moving coil galvanometer and a ballistic galvanometer?
It can be used to form ammeter measuring the current intensity , Voltmeter measuring the potential difference , ohmmeter measuring the resistance.
a high resistance in series
A galvanometer can be converted into a voltmeter by connecting it with very high resistance.
A voltmeter is used to measure the difference in electric potential ("voltage") between two points, usually but not necessarily in an electrical circuit..
It depends on the resistance of the galvanometer and the current required to reach full scale. A 100 ohm meter requiring 1 milliampere would require 99.9 KOhms in series to become a 100 volt voltmeter.
The voltmeter is connected in parallel between the two points whose potential difference is required.
That won't work. To convert an ammeter (a galvanometer is a very sensitive type of ammeter) you connect a high value resistor in series with it.
Connect a large but precisely known resistance in series with the galvanometer. For example, if you connect a 1-Megohm resistor in series with it, then the galvanometer will indicate 1 microampere of current when it's connected across a potential difference of 1 volt ... quite a sensitve voltmeter.
a calibrated instrument for measuring the potential difference between two points.
A voltmeter is used to measure the difference in electric potential ("voltage") between two points, usually but not necessarily in an electrical circuit..
A multimeter measures electrical properties such as AC or DC voltage, current, and resistance. Rather than have separate meters, a multimeter combines a voltmeter, an ammeter, and an ohmmeter. The two main kinds of a multimeter are analog and digital. A voltmeter measures the potential difference (voltage) between two points. the voltmeter only measures volts.