FM = Frequency Modulation; AM = Amplitude Modulation; each being a technique by which the speech signal is imprinted onto the carrier signal (the one to which you tune the radio).
FM is a higher frequency than AM. FM also only uses the 2.7hz upper side band of the frequency while AM utilizes the entire 6hz both the LSB, USB and the .6hz carrier wave. That allows AM to travel farther than a FM signal.
A: FM means frequency Modulation meaning the frequency remain the same. pulse modulation the frequency can vary
Mix it with a local oscillator whose frequency is (the IF frequency) away from the frequency of the FM signal you're interested in.
boz there is lesas interferance to the signal as a signal travels...............
the digital signal is converted to analog signal after using by transmitted antenna
because demodulated FM is an audio signal, which the frequency is much smaller that is why it can be transmitted alone. It need carrier which has large frequency. Modulated signal is an audio signal + carrier that is why the amplitude is higher.
The FM signal is more amune to static in the atmosphere than AM signals.
FM or frequency modulation is a means to vary the frequency withing a set basic frequency and transmit it. FM radio demodulate the frequency extracting the signal that made the frequency shift at the source.
The limiter clips the top and bottom of the FM signal to remove any AM signal or static that was picked up. This prevents the FM discriminator from seeing those unwanted signals and inadvertently converting them to audio, scrambling the intended audio signal. Simply put, the limiter blocks interference and static making FM reception very clean.
Generally, the wavelength of an FM signal is shorter than an AM signal. A typical FM broadcast band is 88-108 MHz, while a typical AM broadcast band is 540-1660 KHz, making the FM signal wavelength 100 times shorter.
Fro transmitting FM signals from one point to another,one need to have a full system that transforms your signal. The FM transmitter and FM modulator are two parts of this system and they are both necessary in making the system function as desired. The transmitter is the part that dissipates the FM signal into the air so that it can be received by antennas somewhere else. The FM modulator, on the other hand, is responsible for piggybacking the signal onto the carrier signal. Refer american-writers.org for more information.
A: AM radio is an Amplitude Modulation transmission . Meaning it has fix frequency but it is modulated by the signal. FM Frequency Modulation the frequency is modulated by the signal
If the signal is bandwidth to the fm Hz means signal which has no frequency higher than fm can be recovered completely from set of sample taken at the rate