Yes, the Speaker is in the door.
Yes, the door panel needs to come off to replace the speaker.
the four door speakers are 6x8 and the sob if you have one is 8"
# Remove the door trim panel # Remove the mounting screws withdraw the speaker unplug the electrical connector and remove the speaker
Remove the speaker covers from your 1997 Mercury. Remove the door speaker retaining screws. Remove the door speaker wiring harness. Reverse the process to install your new door speakers.
To find your speaker wires, check your owners manual. You should find a diagram with the location and color of your speaker wires.
The plastic covers usually snap onto the outer edge of the speaker. Using a small pry bar or a screwdriver around the edge should pop it off.
The speaker sizes for 97-2001 mountaineer that would make a stock fit would be a 5x7" speaker for front and rear. The Ford/Lincoln/Mercury company is notorious for using this size. You can also double check those kind of figures for any vehicle on crutchfield.com, a leading online audio/video company.
How to change door speakers on a 1997 mercury tracer wagon
5x7 all the way around. Replace with after market 6x8 with 5x7 holes.
you will take the rear door panel off..there should be one screw and some plasic 'trees'...you will slide the arm rest/power window switch through the opening (so you dont have to unplug it) and the 5x7/6x8 speaker will be right there...you will need a smalled socket set to remove the speaker
NEED COLOR CODE FOR RADIO SPEAKER WIRE 93 MERCURY
I have a chevy 2001 ls tahoe. How do you access the drivers side door speaker to change step by step.