0
Yes a hole saw would be needed if installing a traditional doorknob. Unless you are replacing a existing doorknob and a previous hole for the doorknob is already cut into the wood.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the movement of static charge from one place to another?
Static Discharge:Perhaps you see a spark jump between your hand and the doorknob. The spark is an example of an electric discharge. An electric discharge is the movement of static charge from one place to another. The spark you saw was the result of a static charge moving between your hand and the doorknob.
How to?
How to Change a Circular Saw Blade Doing your own home repair work can sometimes seem like a challenging task to say the least. There are many tools needed in the process: one of which is a circular saw. There are times when replacing the blade in a saw becomes a must. One reason can be that it simply needs an upgrade. Another would be that the original blade is old and has become dull. In any case, changing the blade in a circular saw requires careful preparation as it can be very dangerous if not done properly. This article is designed to explain in detail how to change a circular saw blade. STEP 1 Make sure that all of the power is turned cut off from the saw. Unplug it from the wall and make sure the cord is no where near an outlet. After all, you don’t want it to turn on while you’ve got your hands on the blade. STEP 2 Slide the guard away from the blade, exposing it. Then sit the entire saw down on a work bench and make sure it is kept immobile. STEP 3 Using two clamps, secure the saw to the bench making absolutely sure that it is secure. Even though the saw is unplugged, it can still fall and severely cut your foot. STEP 4 There is a hole on the saw blade that will allow access for a drill bit. Locate this hole and have a bit handy. STEP 5 Place the drill bit through the hole to make sure that the blade doesn’t move. This is to keep it from cutting your hand. Please note that many newer models come packed with blade lock features that will keep the blade immobile. STEP 6 Use a socket or wrench to remove the blade bolt that is located in the center of the blade. After this bolt is removed, the entire blade will release from the saw. Remove it. STEP 7 Install the new saw blade and make sure that the bolt is secured tightly. Now remove the blade lock and push the cover back over the bladed part of the circular saw. Now your circular saw is as good as new.
Did newton discover that white light is actually a mixture of colors?
Sir Isaac Newton discovered that white light is made up of a mixture of colors by cutting a hole in a thick curtain and placed a prism in front of it and saw the colors of the rainbow. Your basic answer is yes.
How does the laser circular saw work?
A laser circular saw does not use the laser to cut. The saw has a traditional circular saw blade. The laser is used to help the user guide the saw to the correct place where the cut is desired.
A see-saw acts like what?
A see-saw acts (or is an example) as a Lever.
How do you install a pet door without a jig saw?
You will need a saw of some sort: A hand held Key hole saw will work, it will just take some time. Careful use of a large construction saw will do, but a single slip will cause big damage. A circular saw can work. Just be very careful.
How big a hole is needed for a shower valve?
Typically a hole for a single handle shower valve can be easily created by a good 3 5/8" hole saw. If u are installing a 2 or 3 handle valve the hole is 1 1/8inch hole saw. Take care in using the hole saw. Please read all manufacturer directions before u install this valve.
How do you cut a bung hole?
with a bung hole saw o with a bung hole saw or bung bit
What is the function of a hole saw?
A hole saw is a round metal cup with teeth on the rim and usually a threaded centre hole to mount it on an arbor. Most common uses are cutting lock holes in doors and holes for faucets in new countertop.
Is it possible to cut a hole in a cast-iron porcelain-clad sink with a hole saw?
Yes, you would have to use 2 different types of hole saws. 1. Diamond Sintered hole saw to get through the porcelain to stop it from chipping. 2. Aluminium hole saw to get through the cast iron. Goodluck!
How do you install a dog door without a jig saw?
Drill 4 large holes (3/8 -1/2) where you want the corners to be, then use a 'keyhole' hand saw to cut a line between each hole. (this is a small, cheap drywaller's saw that costs less than $10.
Is a hole saw a circular saw?
"Yes, a hole saw is a circular saw. It is primarlily used to cut through thin materials and is used in a drill. Hole saws, or circular saws, are used to cut wood, plastic, concrete, or stone, depending on the type you have." A hole saw refers to the bit. Round bit like a piece of pipe, used in a drill, that cuts a hole and leave a donut or plug from the hole instead of an auger or butterfly bit that chips out all of the wood in the hole. A circular saw is the saw that uses a flat circular blade to cut in a straight line.
How much does a diamond hole saw cost?
The last one I bought was a 1" hole saw for tile It cost $15 in Home Depot.
What kind of hardwood flooring is easy to install on your own?
There are lots of kinds of click-in, tongue and groove flooring available. All you'll need is a hammer and a power saw to install most of the brands out there.
You are in a room with a saw and piece of wood how do you get out?
You are supposed to saw the wood in half. Two halves make a whole. You jump through the "hole" and you're out. In elementary, there was a similar one, but it was with a mirror and a table. You look in the mirror you see what you saw. You take the saw. Then you saw the table in half. Two halves make a whole. You jump through the hole and you're out.
What do you put in the chuck of the drill to make a large hole in acrylic?
I would use a "hole saw".
How does the guy get out of the box with a table and mirror?
You look into the mirror see what you saw take the saw cut the table in half two halts make a hole jump into the hole
