No, lug nuts hold your wheels onto the hub.
remove the six lug nuts
How to change your own tires on a stratus. First your car needs to be parked on a flat surface to prevent rolling. Get out your vehicle tool kit. Remove your spare tire, then loosen your flat tires lug nuts, but do not completely remove. Set up your jack so your automobile does not lean. Completely remove the lug nuts. Remove the flat tire. Slip on the spare and tighten in the lug nuts. Remove jack.
you need the key for the lug nuts. if you do not have the key then hit up either a Merchants or NTB or someone else that does tires
Loosen the lug nuts about 1 turn. Then raise the tire with the jack. Completely off the ground. Then remove the lug nuts. Remove and replace tire. Then tighten lug nuts until snug. Lower the tire and remove the jack. Completely tighten the lug nuts back up in a star pattern. Repeat for opposite side.
To swap tires, first ensure the vehicle is on a flat surface and securely parked. Use a jack to lift the vehicle off the ground, then loosen the lug nuts on the wheel you want to remove using a lug wrench. Remove the lug nuts completely, take off the tire, place the new tire on the wheel hub, and hand-tighten the lug nuts. Finally, lower the vehicle back to the ground and fully tighten the lug nuts in a crisscross pattern for even pressure.
Remove the lug nuts by turning counterclockwise.
Tires can be removed from vehicles by first placing the vehicle on a jack. You will then need to raise it, and with the use of a tire iron to remove the lug nuts, the tire will be able to be removed from its axle.
remove the jack. remove the hubcap. loosen the lug nuts. Raise the vehicle. remove the lug nuts. remove the flat tire. replace the tire. tighten the lug nuts. lower vehicle. tighten the lug nuts again. replace the hubcap.
To effectively change tubeless tires on your vehicle, follow these steps: 1. Park on a flat surface and engage the parking brake. 2. Loosen the lug nuts on the wheel with a wrench. 3. Lift the vehicle with a jack and remove the lug nuts. 4. Take off the old tire and replace it with the new one. 5. Tighten the lug nuts in a star pattern. 6. Lower the vehicle and double-check the lug nuts' tightness.
Remove old lug nuts replace with new one. I recommend buying lug nuts from toyota dealers. OEM lug nuts last longer than aftermarket.
if you mean the wheels, take the lug wrench out of the trunk, pry off the hubcap if equipped, loosen the lug nuts of the wheel you want to remove 1 turn counterclockwise. raise and support the car with whichever wheel you want to remove off the ground, use the lug wrench to remove the nuts entirely, then slide the wheel off the studs. if you then want to remove the tire from the wheel, take it to a garage that changes tires...........you'll never get it off without a tire machine!
jack it up and remove the lug nuts. take tires to a tire dealer, talk to salesman behind counter to get expert opinion on replacement tires, let mechanic at tire dealer change tires on a tire changer machine and then have same mechanic balance tires on a tire balancing machine, don't forget to bring plastic or cash, bring tires home and lift back onto wheel studs, remember to lift with your legs not your back, reinstall lug nuts, don't forget to tighten said lug nuts to proper torque in a star pattern. remove jack and enjoy drive.