answersLogoWhite
Radiators
Home Improvement
Heating Ventilating and Air Conditioning

Do radiator covers reduce efficiency?

535455

Top Answer
User Avatar
Wiki User
Answered
2013-05-08 14:27:46
2013-05-08 14:27:46

Radiator Covers can actually increase efficiency, as they can be designed to push the air forward instead of straight up. This improves air flow around the room, prevents the air from just sitting under the ceiling, and lowers the amount of heat the wall absorbs.


True

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Answering "http://wiki.answers.com/Q/Does_radiator_covers_reduce_radiators_efficiency_for_houses"


Car or truck- summer yes,,,,winter no, increases it. House- yes and no, depends on the MFG of the cover.Check the specs for each MFG.


Reduce the throttle setting - ease up on the gas. Improve the efficiency of the radiator. Get a bigger radiator, fit an Electric fan, make sure the water pump is working OK. Flush the radiator. Fit water injection to the Engine. Fit an oil cooler.


Either improve efficiency or reduce quality


There are several causes that will reduce the water level in your car radiator. The most common cause is evaporation. Engine overheating will also reduce the radiator water level.


Cool radiator. This is the type of radiator that decreases the efficiency of the fuel and thus the conductor becomes angry and so does the hot brunette.


Improved fuel efficiency would also help to reduce his transport footprint.


That is the item that is between the radiator and the grill, It covers the front of the radiator.


Loss of energy in the form of heat due to friction mainly causes the reduction in the efficiency of the machine


An energy efficiency paradox is when there is a high demand for energy as much as there are new developments in trying to reduce its consumption


In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.


Friction always acts to reduce the efficiency of a system - it is in many cases lost energy, usually as heat.



greasing a surface helps reduce friction


Apply lean manufacturing methods to reduce stock, waste and improve efficiency, implement quality improvement program to reduce failure/reject levels (Six Sigma), use Rapid Prototyping to reduce development time, undertake an energy efficiency audit to reduce associated overheads





To reduce drag and therefore improve performance and efficiency.


Radiator have metal fins which increases total surface area of the metal body which cooling effect and hence increase the efficiency to maximum cooling effect.


Make other sources of energy cheaper.Reduce the supply of oil.Increase energy efficiency for any source of energy.


frictionIn real machines, as opposed to ideal machines, there is always friction that reduces the efficiency of the machine. Lubricants like oil can be used to reduce friction and improve efficiency.


Vertical glazing systems are becoming more popular as people are more concerned with energy efficiency. Vertical glazing systems are translucent window covers that help to block out the damaging UV rays of the sun. They reduce the heat that would otherwise enter through a window, and therefore can reduce cooling costs significantly.


-reduce efficiency of your unit,and increase pressure ratio of the compressor,-


improve efficiency , accuracy , and to reduce workload



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.