The new pads will last longer, work better, and be quieter if the rotors are resurfaced.
The brake rotors are warped are out of round. Need to do a brake job and have the rotors turned are replaced. Be sure to install new pads and shoes.
try replaceing brake pads, or check the rotors for damage
$600-700 for new rotors and pads, front and rear.
The most common cause of that is the front brake rotors are out of round / warped. Replace rotors are have them turned.
have your brake rotors turned on a lathe, or replace them with new ones.
Your rotors are warped. You will need to have the rotors turned or replaced and new brake pads installed. Warped rotors are caused by over tightening the lug nuts or by excess heat from high speed stops or riding the brake pedal.
Remove the rotors and take them to a machine shop for inspection. If there is not much damage they can be turned.
NO. The rotors will rust overnight if the conditions are right. The rust will be removed the first time the brakes are applied. Yes if the rust has pitted them. Just have them turned on a brake lathe.
Your Brake rotors are warped... Remove them and have them turned or replace them.
More than likely you have warped rotors. Have the rotors and brakes inspected. If the rotors are not too bad and have not been turned before they can be turned and trued and used again. You will also need new brake pads.
Sounds like you need a new set of brake pads and might have to get the rotors turned. Sounds like you need a new set of brake pads and might have to get the rotors turned.
When applying the brakes; if you feel the car jumping it's usually the brake rotors need "turned". And, all depending on the age of the rotors and how much your OLD brake pads have scraped them, you might need to buy new rotors. So, my answer is TURN or REPLACE brake rotors. <end>