The 1990 Stanza only came with a 4 sylinder.
Look at the lower rear end of the engine
The 1990 Stanza has a chain.
The 1990 Stanza could have damage, depending on which engine is in the vehicle. Check to see which engine you have, and if it is listed as an interference engine. If it is the interference type, then the valves are probably bent and destroyed.
My 1990 Stanza has the fuse listing inside the cover of the fuse box.
1990 Nissan/Datsun Stanza 2.4L FI 4cylThe Spark Plug Gap.044 (In thousandths of an inch)
The 1.6 litre four cylinder engine in a 1990 Nissan Pulsar NX has a timing CHAIN
Yes, the 1990 Nissan Stanza features a non-interference engine. This means that in the event of a timing belt failure, the engine's pistons and valves will not collide, potentially preventing severe engine damage. However, it's still advisable to maintain the timing belt according to the manufacturer's recommended schedule to avoid any engine issues.
inside the transmission
Just underneath the alternator on the 2.4
The fuel pressure regulator on a 1990 Nissan Stanza is typically located on the fuel rail, which is situated on the top of the engine near the fuel injectors. It is attached to the fuel rail and connected to the fuel line. To access it, you may need to remove any engine covers or components that obstruct the view. Always consult a repair manual for specific details and safety precautions.
Yes, the 1990 Nissan Stanza is equipped with a timing chain rather than a timing belt. Timing chains are generally more durable and have a longer lifespan compared to timing belts, which often require replacement at regular intervals. It's important to maintain the chain and its associated components to ensure the engine runs smoothly.
I need to replace the rack and pinion in a 1993 Nissan Altima.