Get to know everything about cleaning from http://www.howto-clean.com/. Make your life more easy
If you can, that would be great. Otherwise, drain as much as you can, put clean, cheap oil in the engine and run it for about 5 minutes then drain it and change the filter.
Remove the oil pan from the engine and clean it with kerosene.
Drain the oil from the Cherokee engine. Remove the oil pan bolts and lower the pan. you may need to unbolt the motor mounts and raise the engine slightly to get the pan out. Clean all of the pan gasket from the pan and the block. Put the pan back on with a new gasket then fill with fresh oil.
The oil pan gasket is replaced by draining and removing the oil pan from underneath the vehicle. Be cautious when removing the pan as some oil will remain inside. Clean the edge of the pan with a light solvent to remove all of the old gasket, then dry thoroughly. Replace the gasket and reinstall the pan, torquing the bolts to specification.
The oil resivoir is the oil pan or crankcase. You would have to remove the oil pan to clean the inside. My question to you is, why do you want to do this?
Drain the oil from your Chevy oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Put the new gasket on and reverse the process.
Drain the oil from your 1993 Chevy will oh my not oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Put the new oil pan gasket on and reverse the process.
Begin by removing the oil from your 1999 Chevrolet Camaro oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Reverse the process to install the new oil pan.
u have to remove the oil pan , it is in the rear part of the pan and make sure u clean out the oil pan sludge before u reinnstall it and also clean out the pickup tube,
Drain the oil from your 2000 Chevy Impala oil pan. Remove the oil pan retaining bolts. Remove the old oil pan gasket and clean the surface. Put the new oil pan gasket on and reverse the process.
Drain the water from your 1998 Chevy Lumina oil pan. Remove the oil pan retaining bolts. Remove the old oil pan gasket and clean the surface. Put the new oil pan gasket on and reverse the process.
You will need to drain the oil from your 1998 Oldsmobile Aurora oil pan. Remove the oil pan retaining bolts. Remove the oil pan gasket and clean the surface. Put the new gasket on and reverse the process.