U cant
The BIOS setup shows the options of power settings, storage settings, input-output device settings, booting options etc. One can use these settings to change the way the computer responds immediately after starting it.
The BIOS setup shows the options of power settings, storage settings, input-output device settings, booting options etc. One can use these settings to change the way the computer responds immediately after starting it.
After imported videos and others by flash drive to my computer after that my computer screen in black when on switch on mode
The BIOS environment in a computer (PCs only, not Macs) is a set of screens accessible only during the first part of the booting process. One usually presses a key, such as delete or f2 to get to the BIOS screen. The BIOS screens allow the user to change settings about the hardware of a computer. These settings are usually stuff like boot order, peripheral settings, hardware clock, etc. Be careful when changing settings in the BIOS, as changing the wrong setting may permanently damage your computer. Unless you know what you're doing, leave the BIOS settings alone.
this can be done by booting into the bios when the device is first loading up (not the operating system loading screen)
When you FIRST power on your computer, you should see a flash logo or a flash screen that lists your brand of BIOS. You may be able to push DEL or F12 on initial boot to access the BIOS settings.
List settings commonly configurable through the BIOS setup utility.
On windows? Wrong category. But if it's your computer, just take the battery out of the computer's motherboard and the BIOS will reset leaving no password for the BIOS login. If its a phone then it's not possible.
You'll loose your BIOS settings and the computer won't be able to recognize some of the settings. If the battery goes dead, replace the battery, enter the BIOS settings and load the default, then do whatever is necessary under YOUR BIOS to recognize your hardware, then save the settings.
The Mac does not have a BIOS and so the settings cannot be checked.
If your computer's splash screen can be modified (turned off or on) this setting is going to be found in the BIOS. You will have to consult information for your specific manufactuer to see if the splash screen can be turned off or on. Most can be, a few cannot.
reboot the computer at the bios screen hit f2 that will get you in