no
ZERO at Top dead center.
the timing marks are not on crankgear on cam gear Chevy Lumina 3.1 1995 would it be keyway to keyway
Ford Escorts from 91 to present don't have timing marks because the timing is controlled by the engine computer.
Need to set the timing on a 91 gmc sonoma truck or silver
with the terminal unpluged for the electronic advance 0 degrees.
I believe my burban is supposed to be timed @ 0°. I time it to 8°
TIMING MARKS - '91 EXCELI would very much appreciate an answer to the following question: How do I line up the timing marks to a 1991 Hyundai Excel (so that I know I've correctly set/repaired the vehicle)?Because the marks to be aligned are beneath the level of the fender, you need to use a mirror to ensure that the timing marks are properly aligned.But where do the timing marks have to be lined up with please???
They are on the damper. You'll need to peek under the air intake tube with your timing light at the right corner of the radiator.
On a 1991 Acura Integra, the timing marks are located on the crankshaft pulley and the timing belt cover. You'll find a notch or mark on the crankshaft pulley that aligns with a corresponding mark on the timing belt cover. Additionally, the camshaft gear will have its own timing mark that needs to align with the cylinder head. It's essential to ensure all marks are correctly aligned when setting or adjusting the timing.
If you have a 6 cylinder 3.0L the timing marks are located on the crankshaft gear for the timing belt (its just a notch on the rear of the gear just spin it clockwise until you find it) that lines up with a notch that sicks out from the block just above it. The camshaft marks are little arrows on the camshaft gears which line up with little marks on the cover plates that close the back of the gears in (about 1 o'clock)
the 91-94 sentra has a timing chain
Timing chain