answersLogoWhite

0

Not USUALLY...in most vehicles, you remove the thermostat housing and gasket, replace them. (With lubricant) An easy job and not expensive! How this helps!

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Can you see a diagram of thermostat housing in a 2003 Lincoln LS?

If you are seeking to replace your thermostat:1. Remove the engine cover.2. You will see a plastic cap to the left of the throttle body. This is the radiator cap. Carefully open it - it's expensive. Look down the cap's housing there to see the thermostat.3. Remove the radiator cap housing and attached hoses to remove/replace the thermostat. Before you do that, carefully note the position and placement of the thermostat, which is in two pieces.For any other problems or parts, or for a schematic, call Ricart FLM in Columbus, OH, for the best parts prices.(See their website.) Talk to Lonnie G. there. :


How do you replace a thermistat in VW transporter?

To replace the thermostat in a VW Transporter, first ensure the engine is cool and disconnect the battery. Remove any necessary components to access the thermostat, such as the air intake or engine cover. Drain the coolant, then unbolt and remove the old thermostat from its housing. Install the new thermostat with a new gasket, reassemble any removed parts, refill the coolant, and reconnect the battery before starting the engine.


Where is the thermostat on 2008 Mazda 3?

The thermostat on a 2008 Mazda 3 is located in the engine compartment, specifically on the engine's cylinder head. It is typically housed within the thermostat housing, which is connected to the upper radiator hose. To access it, you may need to remove the air intake components or other parts that obstruct the view. Always ensure the engine is cool before attempting any repairs.


Cannot get hands or fingers in to remove replace bulbs do i need to remove any parts to get bulbs out?

cannot get fingers or hands in to remove replace headlight bulbs do i need to remove other parts to do this on a 1998 Honda civic?


How do you replace the thermostat in a 2000 Chrysler 300m?

Replacing a thermostat in a car is easily done. A 2000 Chrysler is done like any other car. You open the hood, and locate the thermostat near where you put water in, and then you just remove it with a wash cloth.


How do you replace thermostat 1999 Saturn sl1?

It's actually easier to replace a Saturn thermostat than most other vehicles. Simply remove the thermostat housing and get a new one. The thermostat is molded into the housing. Remove the radiator hose to the housing, then remove the two nuts that hold the thermostat housing to the engine. You may need to work at breaking the housing loose since the gasket has probably seized to the engine. Simply clean off any left-over gasket, and put the new gasket and thermostat housing in place.


How can I remove a Honeywell thermostat from the wall?

To remove a Honeywell thermostat from the wall, first turn off the power to the thermostat at the circuit breaker. Next, carefully remove the cover of the thermostat to access the mounting screws. Use a screwdriver to unscrew the mounting screws and gently pull the thermostat away from the wall. Be sure to disconnect any wires attached to the thermostat before fully removing it from the wall.


What kind of thermostat do you need for a Ford 390 engine?

Any Auto Parts store can provide you with this information when you buy a new thermostat.


To replace a thermostat in a 1990 Ford Tempo do any other parts have to be removed?

You first need to remove the water pump. The thermostat is mounted inside water pump housing. It is a cumbersome process removing the water pump. Like loosening the belt tensioner and attached belts. But, once that is done and the water pump is off. It is a simple pop out of the old thermostat and pop in of the new one. Then reassemble in reverse order.


How do you remove a thermostat on a Kia Sorento?

To remove the thermostat on a Kia Sorento, first, make sure the engine is cool and disconnect the negative battery terminal. Drain the coolant and remove any hoses connected to the thermostat housing, typically located near the engine block. Unscrew the thermostat housing bolts, lift off the housing, and remove the old thermostat. Clean the mounting surface, install the new thermostat, reassemble the housing, reconnect hoses, and refill the coolant.


What thermostat fits a 1970 225 dart?

a 160 to 180 degree thermostat will work and any auto parts store should be able to get you one.


Cannot get fingers or hand in to remove replace headlight bulbs on a 1998 Honda civic do you need to remove any other parts to do this?

Have someone with smaller hands to do it for you.