The amount (volume) of water is measured in gallons or cubic feet.
To convert the volume of a cylinder from square inches to liters, you first need to calculate the volume in cubic inches using the formula V = πr^2h. Then, convert cubic inches to cubic centimeters by multiplying by 16.387. Finally, convert cubic centimeters to liters by dividing by 1000.
To convert 250 milliliters to inches, we first need to understand that milliliters measure volume, while inches measure length. If you're looking for an equivalent volume in cubic inches, 250 ml is approximately 15.25 cubic inches. This is calculated using the conversion factor where 1 milliliter is approximately 0.0610237 cubic inches.
It is impossible to find volume (what cubic inches measure) using only two numbers which i assume are length and width, which only gives you area in square inches.
using those dimensions, 38.89 cubic feet not square feet
Standard cubic feet per minute in regards to water can be converted to inches. What you will do is first calculate the cubic feet. Next, convert the cubic feet into cubic inches by using the standard measurement of 1 cubic foot being 1,728 cubic inches.
You cannot change two totally different units like that - gallons are a measure of volume - how much liquid is there? Inches are a measure of how long something is. There's no way to compare them.
cubic inches is a unit of volume already. If you know how many cubic inches something takes up, then you know it's volume. ALTERNATE ANSWER: This depends on the volume that you are trying to calculate. In general, you take the formula for the volume, and plug in your units in inches. The result will be in cubic inches. FOR EXAMPLE: The formula for the volume of a sphere is 4/3 * PI * r^3. If the radius is 254 centimeters, we have to convert to inches first: 1 inch = 2.54 centimeters Using dimensional analysis, we have 254 centimeters * 1 inch / 2.54 centimeters = 100 inches. Now plug in r = 100 inches: 4 / 3 * PI * 100^3 = 4 / 3* PI * 100 * 100 * 100 = 4/3 * PI * 1,000,000 which is ~4,188,790.2 cubic inches. MUCH EASIER EXAMPLE: The volume of a cube is the s^3, where s is the length of it's side. So if the length of the side is 10, then your answer is 10 * 10 * 10 = 1,000 cubic inches.
First are you sure you want cubic feet and not cubic YARDS!Where I sell/buy my stuff to they measure in cubic YARDSthe formula is CUBIC YARDS = (square feet) x (height inches) x .0031in your case 625 x 2 x 0.0031= 3.9 cubic yardsSimple School Word math problem solving helps with cubic feet!You gave the Square feet of the garden = 625.The formula for Square feet is: length × widthThe formula for Cubic feet is: length × width × heightFirst! All the measurements in formulas must be in the same units!Convert the 2 inches to feet. The math formula is (part) / (whole )we are using inches so just to remember show them in our formulaFormula is now (part in inches) / (whole in inches)There are 12 inches in 1 feet . Our answer will be in FeetSo (whole part) in inches is 12 inches or 1 feet.You have a 2 inches part OF the whole 12 inchesor 2 inches OF 12 inches2 inches is 2/12 of a feetor 2 / 12 height in feetNow sub into the Cubic feet formula all our know values(cubic feet formula) = (square feet) × (height in feet)(cubic feet) = (625 sq feet ) x (2/12 feet)Doing the math using order of operations rules PEMDASwe see P () the 2/12 feet reduces to 0.1666 feet as a decimalNow (cubic feet) = (625) x (0.1666)(cubic feet) = 104.125You would need 104 cubic feet of topsoil.
using a cubic ruler
Using SI unit the measure of capacity, or volume, is through the metric liter (L) and cubic meter (m). In American systems cubic inches and gallons are the corresponding measures.
To determine the number of cubic feet of sand in square feet, you would need to know the depth of the sand in feet. Once you have the depth, you can multiply the area in square feet by the depth in feet to calculate the volume in cubic feet. This is done by using the formula Volume = Area x Depth.
To convert cubic inches to cubic feet for a round tree, you would first calculate the volume of the tree in cubic inches using the formula for the volume of a cylinder (π * (radius)^2 * height). Then, divide the cubic inches by 1,728 (the number of cubic inches in a cubic foot) to get the volume in cubic feet.