Want this question answered?
yes
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
You need the appropriate ballast for either of these bulbs to make them light.
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
Yes, a ballast is required for HPS (high-pressure sodium) lights. The ballast helps regulate the electrical current and provides the initial high voltage needed to start the lamp. Without a ballast, the HPS light would not function properly.
yes
No. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
You need the appropriate ballast for either of these bulbs to make them light.
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
All high-intensity discharge (HID) bulbs, and all fluorescent bulbs, require a ballast, which is a device that limits current. It can raise the voltage and/or heat the bulb cathodes.
When you want to use a MH bulb in an HPS ballast you must use a conversion bulb. It must be the same wattage as the HPS bulb
Yes, a ballast is required for HPS (high-pressure sodium) lights. The ballast helps regulate the electrical current and provides the initial high voltage needed to start the lamp. Without a ballast, the HPS light would not function properly.
The quick way if the bulb is flickering or out, replace if still flickering or out you need a new ballast!
In most cases a cfl bulb can be replaced with an incandescent bulb as long as the base matches. for an example: if a cfl bulb has a GU24 base an incandescent bulb will not work! Also, ensure the wattage of the bulb does not exceed manufacturers rating.
If it fits and the controlling ballast or electronics is compatible with the bulb type. The 240 volt socket rating is just and indicator of the maximum voltage that can be applied to the socket.
430 watt bulbs are made to juice a little more light from a standard 400 watt ballast. you get about 3-5000 more lumens. A typical 400 watt HPS produces about 50-55,000 lumens. The 430 will put out about 58,000. Not a lot, but a little extra without any increase in power usage.
need a universal voltage ballast 120/277 volt or a 277volt ballast