No.
can you plug a 115 volt into a 110 volt
The current will remain in a 220 volt circuit as long as the circuit load remains in the circuit and the circuit remains closed.
Both legs of a 240 branch circuit need to be fused with a fuse rated at 240 volts or better. The voltage potential across the load is what governs the fuse voltage ratings.
More information is needed, maybe a lot more. Depending on its size you may need a new circuit for it. If you trip the breaker then don't use it and get a new circuit installed for it on its own breaker. You are probably talking about a window unit. If it is a simple 5000 BTU unit you can probably plug it into the nearest receptacle. If you trip the breaker then you need to run a new circuit for it. If it is much larger you may need to run a new circuit. If it is a 240 volt unit then you need a new circuit.
First, someone would have changed the plug before that would be possible. 240 Volt receptacles do not accept 120 Volt plugs. Second, IF someone changed the plug on the compressor, then plugged it in using both legs of the 240 Volt circuit, the compressor motor would self destruct instantly; internal wiring would burn and you would smell the burning insulation.
With a 12 volt battery charger that is made to plug into a 220 volt circuit.
A volt can not be connected to a circuit.
No. You need to rewire the circuit from the electric panel.
can you plug a 115 volt into a 110 volt
You can plug it in but it will not work. You need a 6 to 12 volt power step-up converter. Simply plug it into the cigarette lighter and then plug your GPS into the unit.
The current will remain in a 220 volt circuit as long as the circuit load remains in the circuit and the circuit remains closed.
You need these types of circuit breakers when using 240 volt power rather than 120 volt. Large appliances such as a dryer require these larger circuit breakers. Other appliances such as stoves and some water heaters also require them.
A map of a circuit is not a volt. A map of a circuit is referred to as a schematics chart. The schematics chart details the path of the circuit, from beginning to end.
It depends on the use it is being put to. It is sufficient for a 24 volt circuit. Too much for a 12 volt circuit and too little for a 240 volt circuit.
Both legs of a 240 branch circuit need to be fused with a fuse rated at 240 volts or better. The voltage potential across the load is what governs the fuse voltage ratings.
More information is needed, maybe a lot more. Depending on its size you may need a new circuit for it. If you trip the breaker then don't use it and get a new circuit installed for it on its own breaker. You are probably talking about a window unit. If it is a simple 5000 BTU unit you can probably plug it into the nearest receptacle. If you trip the breaker then you need to run a new circuit for it. If it is much larger you may need to run a new circuit. If it is a 240 volt unit then you need a new circuit.
Use a volt meter Plug a 120 volt accessory into it