0
What else can I help you with?
How do you replace the alternator in a 2000 Chrysler Sebring convertible?
When replacing the alternator on a 2000 Chrysler Sebring convertible begin by removing the belt. Next, remove the wiring. Lastly, remove the retaining bolts. Reverse the process to install the new alternator.
Where is the thermostat in a 2004 Chrysler Sebring convertible?
The thermostat for a 2004 Sebring Convertable is in under the water outlet for the BOTTOM radiator hose. This is behind the alternator which will have to be removed, after you remove the belts. Plan on an afternoon of work. Hope this helps.
How do you get to the fuel pump on a 1998 Chrysler Sebring JXI convertible?
You have to remove the fuel tank.
Where is the thermostat on a v6 sebring?
the thermostat is behind the alternator! gotta remove the alternator and most of the plugs around it to get to the bolts on the thermostat housing
How do you replace the starter on a 2001 Chrysler Sebring convertible?
Remove the positive battery cable from your 2001 Chrysler Sebring battery. Remove the cables from the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Where is the convertible top motor located in a 2002 Chrysler Sebring?
It is behind the rear seat. You have to remove the seat to access.
Where is the hydraulic motor in a 1999 Chrysler Sebring convertible?
It is behind the rear seat. You remove the rear seat to access.
How do you remove the alternator on a 1997 Chrysler Sebring?
Its a tricky one. You have to unscrew the water pump in order to move it out of the way to get to one of the screws on the Alternator.
How do you replace the alternator on a 1996 Chrysler Sebring JX convertible?
I just replaced the alternator on a 97 Sebring JXi convertible, 2.5L engine. I had to remove the four AC compressor mounting bolts so that the AC could be moved away from the engine enough to get a socket on the alternator pivot bolt. You do not need to break the compressor lines. I also removed the top mounting ear bolt and the bracket to make room to remove the alternator from the engine compartment. Of course the first thing you do is disconnect the negative battery terminal either at the battery or at the jumper cable location in the engine compartment. You also have to loosen the idler pulley and remove the belt. I removed the front right wheel and plastic cover to get to the pulley and belt. This also permits better access to the AC compressor bolts. I found it easier to get the alternator free before I disconnected the electrical wires.
Where are the drainage holes for 1999 sebring convertible?
remove the plugs from the drainage holes located in front of the rear tire wells
Where is the hydraulic pump for a 1996 Chrysler sebring convertible?
It is between the rear seat back and the trunk. You have to remove the rear seat to access.
How do you remove the rear seat from a 1998 Sebring convertible?
# Slide your fingers underneath the bottom part of the seat from the front. # Pull up. Hard.
