not necessarily. just make sure you got the right size wrench... although, there is an oxygen sensor tool specifically for removal and replacing. would make your life easier.
AUD3000
It requires a special slotted socket. It will be cheaper to have a repair shop do it for you.
To replace the oxygen sensor on a Honda Odyssey, first unscrew the sensor. Then use a 22 mm socket or 7/8 inch wrench to replace the oxygen sensor.
It requires a special socket with one side cut out so as not to damage the wiring.
To replace the oxygen sensor disconnect the oxygen sensor electrical connector. Use an oxygen sensor socket to remove the sensor. spray the sensor with penetration oil if it is difficult to loosen. install in reverse.
An Oxygen sensor does not reset. You have to replace them and yes they are expensive.
The upstream oxygen sensor is the one before the catalytic converter. It will require a special socket to remove and replace it. jd
It requires a special socket and it is only good for oxygen sensor replacement. Buy the socket and unplug the sensor ,install the socket and remove the sensor.
You bring it to a service station and tell them to replace the oxygen sensor.
how do you replace oxygen sensor of 2001 bmw 318 ci es
its in front of car in the exhaust manifold, u need a special socket to remove oxegyn sensor. fairly easy
Need a special socket. They are located in the exaust manifold(s).