Yes, you need a wrench to remove oil plug. I think it's 12 mm on that.
i think its on hot pursuit
Unfortunatelly NO!
It should be a 3/8 wrench. Correction 10MM and use a socket
To remove the starter in your 05 Pontiac Grand Am you will need a socket wrench. You will also need a car jack to lift the car so you can reach the starter.
In order to wire the starter on a Pontiac Sunfire, you will need a jack, jack stand, socket set, and a torque wrench. You will need to make sure to remove the battery cables from the battery.
you will need a special 02 socket for the one in the manifold and you can use a 7/8 wrench on the one after the converter.
you have to buy a special wrench, buy a new belt, stick wrench under hood to a nut that will loosen the old belt, take old belt off, pull on wrench again, feed belt back onto pulleys (draw a diagram first so you know how to reinstall it), remove wrench, done! You do NOT need a special wrench (at least for '03-06). You do need a 17mm wrench or socket to release the tension of the tensioner pulley so you can slip off/on the belt.
You need a 3/8" allan key or hex socket - not a torx
For a 2003 Pontiac Montana, you typically need a 14mm wrench to remove the front caliper bolts. It's always a good idea to verify the size, as sometimes bolt sizes can vary slightly based on the specific model or any previous repairs. Having both metric and standard wrenches on hand can be helpful for unexpected situations.
Need for speed: Hot pursuit. The latter is actually need for speed III: Hot pursuit. It was one of the earliest NFS games, like NFS HP2.
No, Need For Speed Hot Pursuit is not available on PSP.
There is a Spec and using a Tourque wrench is recomended when ever possible and reasonable. But the real answer is No, Just don't break it.