Want this question answered?
If you can plug the fridge into another outlet and it comes on, then the issue is either a bad outlet connection or the circut breaker may be going out and needs replacement. Try the fridge on another outlet 1st. If it trips that one too then there is a short in your fridge.
If it's a GFCI receptacle and the button is not resetting then change the GFCI outlet.
If the GFI outlet is tripped (the outlet, not the breaker) then it is telling you there is a ground fault which must be fixed. If the GFI outlet is not tripped, and the breaker is not tripped, but it is still not providing power, then you have a loose connection or a wiring error.
If it is a 30 amp breaker then it is a 240 volt outlet.
Yes. You can wire more than one gfci to a circut.
If you can plug the fridge into another outlet and it comes on, then the issue is either a bad outlet connection or the circut breaker may be going out and needs replacement. Try the fridge on another outlet 1st. If it trips that one too then there is a short in your fridge.
The recepticle could be a GFI ( ground fault interuptor) which needs to be reset. The circut breaker might have tripped, or you could have a bad plug-in. All are pretty easy to fix. Now if it is a light socket, it could be a bad switch, a tripped circut breaker or a bad light socket.
You probably mean to change it to a 240 V outlet... either case, you'll need to run a new wire and install a new breaker.
Circuit breakers can degrade over time but it would be better to get a competant electrician to do it. It might also mean you have too many things plugged into one outlet. Sometimes one circuit breaker may protect several outlets so it might be tripping because of a change in another outlet. ELECTRICTY IS DANGEROUS!!!! Don't do it yourself.
If it's a GFCI receptacle and the button is not resetting then change the GFCI outlet.
If the GFI outlet is tripped (the outlet, not the breaker) then it is telling you there is a ground fault which must be fixed. If the GFI outlet is not tripped, and the breaker is not tripped, but it is still not providing power, then you have a loose connection or a wiring error.
You need to remove everything connected to the breaker and see if it still trips. If it does it is in the wiring or possibly a bad breaker. Disconnect load from breaker and see if it still trips. If so replace the breaker. If it still trips and is not the breaker then you will have to start pulling each outlet from wall and checking after disconnecting each outlet.
If it is a 30 amp breaker then it is a 240 volt outlet.
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
It means the breaker has been tripped. There are two possible ways to reset it - some have a button on the outlet (there may be several outlets on one circuit, so you may have to look around) the other is the main breaker in your breaker box. You'll need to find a reset the breaker.
Yes. You can wire more than one gfci to a circut.
no. the breaker is 40amps.fire hazard