Want this question answered?
To find the circuit's capacity you have to look at the breaker or fuse that protects that circuit. On the handle of the breaker you will see a number. that number is the tripping capacity of that particular breaker. On a glass screw in fuse you will see a coloured disk with a number on it that is the capacity that the fuse can handle before opening the circuit. On cartridge fuses the voltage and amperage rating will be printed on the body of the fuse.
Fuse
Where I'm from, it's called a "circuit breaker".A circuit breaker.
An example of a circuit interrupter would a fuse or circuit breaker.
Short circuit blowing fuse or breaker.
A circuit breaker does not have a wire fuse in it.
A circuit breaker/fuse is designed to protect the wiring from getting overloaded.
You can reset a circuit breaker but a fuse you must replace.
An example of a circuit protection device is a fuse. Another example is a circuit breaker.
circuit breaker, or "resettable fuse", which is a reallya small circuit breaker in the housing of a fuse
A fuse or circuit breaker used in a circuit is usually inserted in series with the load.
An alternative to using a fuse is to use an electrical circuit breaker.
A fuse or circuit breaker will fit this description.
By a fuse or a circuit breaker.
A fuse/breaker is used to protect the wiring within the home for overheating and catching on fire. When the fuse/breaker detects an excess flow of current beyond the range of the fuse/breaker, within a circuit, it will blow/trip to shut off the flow of electricity in that circuit thus preventing a possible fire.
It does not have a circuit breaker. It uses a fuse to protect the circuit. Look for a blown fuse in the fuse panel under the dash on the drivers side.I believe the cigarette lighter circuit is protected with a glass barrel fuse not a circuit breaker. Check the fuse box for a blown fuse.
A circuit breaker takes the place of a fuse. No.