You will want to leave about 8" of wire sticking out of the box. After connecting the light just push the extra back into the ceiling box.
Some ceiling fans have a black, white and sometimes blue wire. The blue wire in this case is so you can switch a light separate from fan. If your fan doesn't have a light just put a wirenut on extra wire and ignore it. If you do have a light and want it switched you'll need an extra wire run to fan, and switch that wire for light.
form_title= Ceiling Light Fixture form_header= Light up your life with a ceiling light fixture. What is the height of your ceiling?*= _ [50] Do you want to include a ceiling fan? How many light fixtures do you need installed?*= {1, 2, 3, 4, 5, More than 5}
No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.
You can check in local stores. I personally prefer buying lights on-line - there are many on-line stores that sell light covers (also bathroom ceiling fan light), such as Amazon, Wallmart, eBay and so on. If you don't find it under the keyword you used (bathroom fan light cover), you can try searching for "bathroom ceiling fan light cover" or simply "ceiling fan light cover" (and then find suitable one for your bathroom). In case you have a special ceiling fan, you may need to contact the producer of ceiling fans for suitable light covers.
Really need more info.lighting fixture on ceiling fan.ect.......
You can buy clips that attach to the spreader bars on the recessed light itself, then the clips attach to the suspended ceiling bars. You may need to add a pair of additional suspended ceiling bars to make this work. Armored cable should be run to energize the light.
The interior lights in the ceiling are all push-in models rather than buttons, you just need to push on the actual plastic light cover to turn them on & off. Only the very rear light has a switch
The wattage for your kitchen table light will depend on several factors. The size of the room, the type of lighting, and the ceiling height will all need to be considered. You will probably need between 200 and 400 watts of light in your kitchen.
If you are just getting into photography then you do not really need any extra lights if your camera has flash on it. The built in flash should be enough light for a novice.
when the dentist says you need a ceiling that usually means you have a cavity and he need to fill it with cement.
form_title=Repair an Acoustic Ceiling form_header=6383 Describe what is damaged*= [] Tile [] Frame (for suspended ceiling) How many tiles need to be repaired or replaced?*=_[100] What is the problem you are having with your acoustic ceiling?*= () Panels are loose () Panels are cracked () Sound proofing just isn't working () It's just time to replace the panels () Other
form_title= Ceiling Repair form_header= Repair a broken ceiling with help from a professional! Why does the ceiling need to be repaired? *= _ How old is the building?* = _ Does your ceiling contain Asbestos?* () Yes () No () Not Sure