1. Unbolt engine mounts at the frame.
2. Raise motor about 2 inches.
3. Unbolt the pan and slide back. You will the have access to oil pickup tube.
4. Unbolt pickup tube, drop it in the pan and remove it.
i need m0unts for a 78 f350 with a 300 ci in line 6
No.
Where is the belt tensioner on a ford 2003 f350 6l diesel? i need to loosen so that i can replace the alternater
i need the diagrames for the suspension of a 1994 ford f-350 2wd
I need a diagram of ford F350 drum brakes on 1996 model 460 engine 4 wheel drive
which 351? winsor, clevland,or modified. plus the 390 is an FE style motor and transmission mounting is different on all 351,s
No need to change the hubs. 16' rims can be obtained from Colorado Wheel Company and fitted with no problem.
they say you need to pull the motor to change the oil pan but if you just loosen the motor mounts and jack the motor up a few inches you can get to the oil pan bolts, remove them and lower the oil pan.
Yes. The motor and transmission will fit but you will need to redo the front springs and possibly change motor mount locations. I have a 1988 mustang lx with a ford 460 sitting in it.
"You need to go change the motor in The BMW."
you will need to remove the door panel and check the motor on the regulator. if the gears are bad you can usually just change them. (auto parts stores usually have them). if the gears are good you need a new motor.
You can write down your VIN number and call Ford. They will tell you exactly what it is.