It depends upon the type of Skid board. Wax is generally used in fiberglass boards, but i recommend no with wooden boards because it can cause scratches to the board. Wax is generally made to apply to the fiberglass type of board since skim boards and surfboards are only fiberglass. Also board wax is made for surf boards and skim boards.
Also it all depends upon your preference. Do not pay attention to anyone who doubts your style of riding. Remember boarding is about what you want not what anyone else says. So just have a good time. Good Luck And Have Fun!
It depends upon the type of Skid board. Wax is generally used in fiberglass boards, but i recommend no with wooden boards because it can cause scratches to the board. Wax is generally made to apply to the fiberglass type of board since skim boards and surfboards are only fiberglass. Also board wax is made for surf boards and skim boards. Also it all depends upon your preference. Do not pay attention to anyone who doubts your style of riding. Remember boarding is about what you want not what anyone else says. So just have a good time. Good Luck And Have Fun!
Yes
No. You only need wax on the top of a surfboard to help keep your feet on the board.
look at that skid mark
Candle wax isn't the same as board wax. Candle wax can make your board stick to the snow, so just spend the extra couple bucks and buy snowboarding wax.
they put some melted wax on it before they surf so the don't fall of when they are surfing.
To remove the old wax from a surfboard, first soften the wax by putting it under direct sunlight, using a wax comb, scrap the board, and roll over the wax ball on the board to collect the remaining bits of wax.
get the wax and rub it on the board while its dry. the more wax, the better.
No it destroys the board.
not candle wax but the wax that you can put wax warmer it was spilled
Put your iron on WARM! Then get paper toweling. Place the terry towel on your ironing board, put the paper toweling over it and press with the iron for 6 - 7 seconds. It will melt the wax (you may have to do this several times until all wax is melted.) If the wax is red or any other color and your terry towel is white, you could then put it in cold water with a little bleach and let it soak for approx. 20 mins.
put more wax on to wax it off