I have always cleaned and re-used the bolts. But DO replace the gasket if there is one, don't re-use old gaskets.
There is bolts unscrew them and the replace again
To replace the water pump on a 2003 Grand AM, the first step is to loosen the bolts on the old one and drain the fluid into a bucket. After it is drained, remove the bolts and the water pump and all of the hoses connected to it. Then, put in the new pump, reattach all of the hoses, tighten the bolts, and then refill the coolant reservoir.
the fuel pump is located under the fuel lid remove the lid and you will see a square plate with bolts remove bolts and pump sender comes out change pump then reassemble
Remove serpentine belt, alternator, and power steering pump. Remove 4 water pump pulley bolts. Remove water pump housing bolts. Remove water pump.
The water pump on a 97 Nissan Sentra is behind the timing belt. To replace it you will need to drain the coolant, remove the cylinder head, loosen pulley bolts, drive belts, and water pump pulley. Next, remove coolant hoses, water pump bolts, and finally the old water pump. Reverse directions to replace with new pump.
remove belt pump is accessable remove bolts make sure coolant is drained first replace
Answerwell if it is in a 95 you have to take off the coil pack then the power steering pump then take of the bolts on the water pump
loosen the bolts on the water pump pull and take off the belt, then take off the pully. take the hoses off then remove the bolts from the water pump and pull it off
No, you do not need. Just remove all bolts and pull it out. Make sure that you replace the water pump gasket.
Remove the belt from your 1999 Chevy Metro water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to replace the water pump.
You do not have to change the timing belt to replace the water pump. You do have to remove the timing belt cover to be able to access the bolts that hold the water pump on.
Remove fuel lines Remove 2 mounting bolts Slide fuel pump out Replace pump and gasket Make sure engine cam operates fuel pump lever