Want this question answered?
Yes, if the turns ratio is 1:230. Note to do this, you will have 230Amps of current on the input for every amp on the output, so you should size your transformer windings accordingly.
To improve the best case, all we have to do it to be able to solve one instance of each size efficiently. We could modify our algorithm to first test whether the input is the special instance we know how to solve, and then output the canned answer. E.g. For sorting, we can check if the values are already ordered, and if so output them.
To get you started, you need a simple conversion function to convert inches to millimeters. Here's an example using the literal constant 25.4: constexpr double convert_inch_to_mm (const double inches) {return inches * 25.4;}
An average household is 4 people . They require a 40 US gallon heater. Add 10 gal for each additional person.
Not sure what you mean; if you want to measure the "input size" in bytes, that would probably be 8 bytes, since integers typically use 4 bytes.
output
its like a input or output
WANT THE ANSWER TO THIS QUESTION
input 230-240v output 12v-55va
A gear is always made up of (at least) two sprockets (or cogwheels), and the only size that matters is size in comparison, and which is input and which is output. This is also known as a ratioFor a bike input would be by the crank and outputwould be by the rear wheel.You get a lower gear by making the input smaller and/or the output bigger, and you get a higher gear by making the input bigger and/or the output smaller.
100,000 btu input. The output depends on the efficienct rating of the furnace, ie 95%efficient = 95,000 btu output, 80% = 80,000 btu output.
Yes, if the turns ratio is 1:230. Note to do this, you will have 230Amps of current on the input for every amp on the output, so you should size your transformer windings accordingly.
A cone crusher has a control cabinet which controls machine operation. You can also adjust the input size and output size according to your needs.
The only thing that limits the number of inputs and output instructions is the size/amount of the PLC memory.
A symons cone crusher has a control cabinet which controls machine operation. You can also adjust the input size and output size according to your needs.
The formula you are looking for is I = W/E, Amps = Watts/Volts. Amps = 5000/230 =21.7 amps. The wire size to run this heater would be a #10 copper conductor. The supply breaker would be a two pole 30 amp breaker.
Assuming the zero state output of the DAC is 0 volts, then 4095 steps of 8mv would yield a full scale output of 32.76 volts. The resolution is one part in 4096, or 2.44 percent. An input of 010101101101 is 1389. Multiply that by 8mv, and you get 11.11 volts.