Not on the head gaskets.
lt1 is a 350
take out the cylinder head bolts
Yes.
No. Not without switching the cylinder heads. I think it was 89, Chevy came out with the 1st generation Vortec heads, which require a different intake.
need year of vehicle first.1995
Answer The 86 Chevy block and the 87 Chevy block are the exact same block, nothing changed, it will fit perfectly.yes
all small Chevy heads are 65 ft lbsin a circular motion from the center out
head gaskets??? warped heads? did you have them milled?
No. You would have to switch the cylinder heads, fuel pump, and ad some computer equipment to operate the injection.
Yes, but running a 350 cam with 305 heads is not effective,you need to run 350 heads as well. In order to benefit from a 350 cam you need something to flow that extra fuel and air, so using 350 heads along side of the 350 cam will be the cheapest and best choice. HAVE FUN!! A 350 head can physically bolt onto a 305 block. However, 350 heads can have the valves extend into the cylinder and contact the cylinder wall (even with the smaller 305 cam). The 350 cam in the 305 with stock heads will work. You wont want to use 350 heads you will lose compression due to the largers combustion chambers.
bolt them on their the same
That's what should be on it.