0
You only use the skimmer/s
What else can I help you with?
Does the main drain line in skimmer have water in it when closing the pool?
No. You cannot use the main drain to lower the water level below the skimmer. This is because the main drain is not really a drain. It only connects right back to the 3 port valve in the skimmer.
What is the Purpose of a main drain in a swimming pool?
If its not connected through the skimmer I imagine it's there to empty it. hmmm, on the above. The main drain in pools is for circulating the lower part of the pool and is not intended to drain the pool as in a bath tub.
How do you use the bottom drain in an in ground pool?
Well, if you mean to drain the pool --- it is not a drain as in house plumbing -- the sink -- the tub. It is connected to the skimmer and that is connected to the pump. Your main drain is most likely 'working'. It does not nave to be a strong flow. Well, if you mean to drain the pool --- it is not a drain as in house plumbing -- the sink -- the tub. IT DOES NOT DRAIN ANYTHING. It is connected to the skimmer and that is connected to the pump. Your main drain is most likely 'working'. It does not nave to be a strong flow.
How do you unclog the bottom drain of a in ground pool if you can't find the junction of the skimmer and the main drain?
Depends how the pool was plummed. If you have a dedicated main drain line, or you share a main drain line and a skimmer line. Both are suction lines to the pump,meaning they will go into the front of the pump. If you have several valves on the front of the pump, and hopefully they are labeled you could try to shut all of them except the main drain and use what is called a drain king. It hooks to a waterhose and swells inside the pipe forcing water in the opposite direction. If you dont have any valves on the front of the pump ,chances are you share suction with the skimmer. check the inside bottom of the skimmer. Main drain may be plummed to skimmer bottom.
Why are small insects not filtering out of your swimming pool?
If bugs are'nt filtering out of your pool and you have a filter, obviously your filter is'nt working. Hope this helped. Bugs will naturally swim away from a strong current that is drawing them to a certain point. If the bug is not drawn into either the skimmer or the main drain grate they will never get to the filter. Even then, they will get caught in the skimmer basket or the pump basket. The filter is not intended for catching the bugs - that is what leaf skimmers are for. If thebug is on the bottom of the pool you can then vac it up but still it will only go as far as the pump basket.
How do you get better circulation in an in-ground pool that has no main drain?
You may try a suction side pool cleaner. Connects into the skimmer. No booster pump needed. Pool Vac, Kreepy Krauly are but a few.
How do you hook up the vacuum cleaner for an in ground pool?
If there is a vacuum port open it and turn off your skimmer port and reduce the flow in your main drain,If no vac port plug the hose into the skimmer, If you have more than 1 skimmer plug one of them off.And please use a pool approved vacuum, Kirby or Hoover will not work.
How do you get rid of leaches in swimming pool?
you could drain the pool, but if you don't want to drain your pool, you could get a pool skimmer and get all of the leaches out of your pool and then carry the leaches to a near by sewer, or a murky pond/lake/river.
How do you turn on your pool drain?
I don't know about your pool I do know however that most pool don't have a way out for the water other then through the static skimmer. and people often mistake the hydrostatic valve at the bottom of the pool as the pool drain
Do in ground pool skimmers work as overflows also?
No your pool is considered a closed system all the water that you add goes only to the filtering system and back. If you put in too much water you will overflow the edges and make your skimmer less efficient. unless you have a floating pool skimmer then the pool will be able to change level without affecting the efficiency of the skimmer.
What is the device called that can alternate between the pool skimmer and the vacuum?
I think you are referring to a Jandy valve. The valve diverts water from the main drain to the skimmers. When vacuuming, turn the valve so it is pointing to the skimmer inlet pipe. OR It could also be called a diverter valve located at the bottom of the skimmer depending on the age of the skimmer. k
How do you run the pool filter through the main drain?
You run the pool filter through the main drain by moving your valve next to your pool pump to main drain only. This is usually a Jandy Value or the like. Usually there are three positions on this value. One for both main drain and skimmers. One for skimmers only and one for main drain only. As a precautionary warning. Only adjust this value with the Pump OFF. Doing it while the pump is running may cause significant damage to the value. No one needs additional pool repairs if it can be avoided. Hope this helps. : ) The above answer is only good if there is a dedicated main drain line to the pump. Most pools in California have the main drain line connected to the front port of the skimmer and use a diverter valve in the bottom to regulate the ratio of bottom or skimmer suction. Jandy and Ortega valves are both designed to be adjusted with the pump running with no fear of damage. Multiport valves should only be adjusted with the pump off.
