YES I THINK
First you locate the white tank on the left passenger side of the car above the wheel well. Most of the tanks are yellowish looking it. It will have a black screw on cap towards the back of the the tank. First make sure the car is cooled down before you unscrew it. Unscrew the cap and fill the tank. leave the cap off and start the motor once the motor warms up the thermostat will open up and you can fill it more then put the cap back on and your done.
is it using water? is there pressure when you unscrew the cap off the header tank? the oil cap will have a kind of fur on it when u unscrew it and sometimes car will blow white smoke from the exhaust because water will get in the engine
I changed mine i have a 1993 astro van the fuel pump is inside the gas tank if your handy with tools u could do it yourself just drop the tank and unscrew the cap on tank and there it is
Fill Spout. When filling your tank with gas, you will need to open your gas tank, unscrew and remove your gas cap, remove the nozzle from the pump and put it in the fill spout.
Drain the gas tank, there is a plug under the tank...unscrew and drain all of the fuel out. Screw the plug back in. Have the vehicle towed to the nearest gas station. Unscrew gas cap. Fill the gas tank with premium gas only. Keep filling after the the pump clicks....you want to make sure you get your moneys worth but dont let it over flow. Tighten gas cap until it clicks. Go inside the store and tell the clerk that you just found out how much gas your tank holds!
If it is a plastic overflow coolant reservoir most simply unscrew. If it has a cap like most radiators then it has to be pushed down before it is turned to get it to unlock.
dry and clean hands have produce friction between hand and cap of bottle so cap unscrew easily
To open the petrol tank on a Passat, inside the car next to the Handbrake on the Centre Console there is a button which when pressed releases the flap to the Fuel Filler Cap. Open the Flap unscrew the stopper and there you are. When finished be sure to lock tight the cap and make sure the Flap is fully closed flush to the bodywork.
When you place a water bottle cap under hot water, the heat causes the plastic cap to expand, making it easier to unscrew. This expansion creates more space between the threads of the cap and the bottle, reducing the friction that holds the cap in place.
Yes, the oil filter is inside the oil tank, accessible from the top (large chrome cap). You simply unscrew it and replace the element.
Overflow tank only
by unscrewing it.