Want this question answered?
For lighting up a city you need 120 volts in the USA and 230 volts in Europe. It's just the usual voltage the light bulbs are needing.
You need the formula: Amps * Volts = Watts But you get to do the math.
At 120 Volts you would draw about 42 amps. At 240 Volts it would be about 21 amps. For 120 Volts you would need 6 AWG and for 240 Volts you would need 10 AWG.
There is some equipment that will operate on 208 volts even though it is rated to be use 240 volts.See discuss question below.
Watts = Volts x Amps. 12 megawatts = 12,000,000 watts. You need to know current to calculate the voltage.
6 litre turbo diesel I NEED TO KNOW THE MPG OF LEYLAND DAF 8-13 MINE IS A RECOVERY TRUCK
If you need to jump start the car then the battery may be fully charged but it is defective and needs replacing. A full charged battery will read 12.6 volts at the posts with the engine not running. 12 volts indicates the battery is only 25% charged.
For lighting up a city you need 120 volts in the USA and 230 volts in Europe. It's just the usual voltage the light bulbs are needing.
a battery should be reading 12 or 13 volts at full charge you would need it over 10 volts but its hypothetical as it depends on the engine size10 To add it's not the voltage that turns the starter motor it is the amount of what is called cranking amps or cold cranking amps cca which refers to the amount of amps when 32 degrees Fahrenheit or up. If you have below the specific amount of amps for your starter it will click, turn but very sold, or do nothing. A 12 volt battery typically needs 400+ amps to start the car. While 5 volts means your battery is dead having 12 volts does not mean your car will start.
You need a step-up transformer.
You need the formula: Amps * Volts = Watts But you get to do the math.
12 volts
A: WELL you cannot not with 1,2v most LED start emitting at 1.8 v some as high as 5 volts . two need at least two 1.2 volts better is 9 volts then there is a problem voltage wise but the problem is now that you need a limiting resistor to ensure at least 10ma of current
It has to be 13 plus volts to keep the battery charged. The car requires a 12 volt battery to start and run this vehicle, so you need more then 12 volts to keep the battery charged.
Assuming the car's electrical system is 12 volts, the answer is 12 volts??
2 volts, 5 volts, 12 volts. New computers need even less voltage.
18000 volts clearance