Well if you look at the 240sx you will see that although the engine size is the same KA24E the engine on the 240sx is SIDEWAYS.
KA24E
130 with ka24e
Nissan 240sx HorsepowerIt depends on what year and what engine the Nissan has, usually 1989-1990 have the ka24e which is 140 hp. While the 91-98 have the ka24de engine which has 155 hp.
On the 1989-1990 240sx with the KA24E single overhead cam engine the E.C.C.S. is located on the top left side of the engine behind the throttle body and on top of the intake manifold.
mine has a ka24e(2.4 inline 4 single cam)
1989-1990 240sx 1990-1997 Hard body 1990-1995 Pathfinder 1989-1995 Axxess 1990-1992 Stanza They are all the same engine.
>>"What type of valves does a 1989 Nissan 240SX have?" what exactly are you asking? the factory motor for the 240sx's, years '89-'90, is the KA24E, single cam, 2.4 liters, 12 valve. It has two intake valves, and one output valve.
Absolutely.
probably not, since 1989-1990 came with sohc ka24e motor not the dohc ka24de motor in the 1991 and newer versions
It will fit if you cut it but as-is it will not attach to the throttle body. The 1989-1990 240's have the KA24e (single cam) and the 1991-1994 240's have the KA24de (dual cam) the throttle bodies are in different positions.
The 1989 Nissan Stanza 2.0 4 cylinder has a timing belt. This is also an Interferance Engine, and as such if the belt breaks, serious engine damage will occur. The belt should be replaced at 60,000 miles.
The Nissan 240SX was brought to America in 1989.