NO IT DOES NOT.
A 1993 Jeep does not have a transmission modulator valve.
If 1993 suburban rear ac not cold how can check the expansion valve?
The At modulator valve is located on the side of the transmission between the transmission tunnel. you may have to lower transmission to get to it.
On the Ford A4LD automatic transmission the modulator valve is on the passenger side of the transmission ( it might be behind a heat shield )
If your car has one, take the vacuum line to the modulator off and if there is fluid inside, the modulator is bad.
There is not an expansion valve on a 1993 Surburban. There is an orfice tube (white) in the high side line of the evaporator.
I believe it's on the passenger side of the transmission behind a heat shield
thats easy you just ....... get a life thats easy you just ....... get a life
A 1993 Jeep does not have a transmission modulator.
How do you replace a radiator in a 1993 suburban?
Where is modulator valve s10Hi there,If your transmission is a stock 1987 s10 2WD or 4x4,the transmission is a 700r4, 4 speed transmission w/ Overdrive.(around 1991 the 700r4, was renamed the 4L60, about 1993 became the 4L60E, E for electronic shift.) This transmission did Not have a vaccuum modulator, as did earlierchevrolet 3sp automatic transmissions. They use a TV cable (Thottle Valve cable) to determine shifting.The TV cable hooks up to the carburetor or injection body linkage -in a (visual way) similar to the older (kickdown) linkages of 3spd automatic transmissions. It is NOT a Kickdown cable.Proper adjustment IS CRITICAL to the survival of your 700r4.you. Good luck
With precision.