0
What else can I help you with?
Where is the thermostat located on 1995 dodge stratus 2.4 16 valve?
where is the thermostat located on a 1995 dodge stratus? 2.4l 24 valve. v6 engine
How do you replace an EGR valve on a 2000 Dodge Stratus 2.4 engine?
Remove the wiring harness from your 2000 Dodge Stratus EGR valve. Remove the EGR valve retaining screws. Reverse the process to install the new EGR valve.
Do a 1998 dodge stratus 2.4 engine have a coil?
Yes, it is the square item on top of the valve cover.
How can you tell if my 2002 dodge stratus has an egr valve?
Look on your exhaust manifold on the back side of the engine for a tube running to a valve with a sensor and vacuum line
Where is the schrader valve on 2001 dodge stratus with a 3.0L engine?
Schrader valves are the type of valve you fill the tires through, so they're found at the wheels.
Where is the egr valve solenoid located on a 2005 dodge stratus?
On the egr valve.
Where is the pcm located on a 1999 dodge stratus?
The 1999 Dodge Stratus PCM valve can be found on the outside of the air cleaner housing. The PCM valve is located on the back of the housing.
Is a 2000 2.4 dohc dodge stratus an interference motor?
Valve to piston, no. Valve to valve, yes.
Why does a 1997 Dodge Stratus die at idle?
it could be your EGR valve.
Where is the location of the Purge Control Valve on 02 dodge stratus?
A person should know the location of all the parts in their car. The Purge Control Valve is located towards the front of the engine, on the passenger side.
Where do you put oil in a 1996 dodge stratus?
Remove the cap on the valve cover and pour it in there.
How do you change a valve cover gasket on a 2002 Dodge Stratus?
To change the valve cover gasket on a 2002 Dodge Stratus, first ensure the engine is cool and disconnect the negative battery cable. Remove the valve cover bolts and gently lift the valve cover off, taking care not to damage any surrounding components. Clean the surface where the gasket sits, place the new gasket on the valve cover, and reattach it with the bolts, ensuring they are tightened to the manufacturer's specifications. Finally, reconnect the battery and check for any leaks after starting the engine.
