Both were available.
YES IT CAN BE DONE BUT YOU HAVE TO HAVE A ETHER A 4WD BLAZER OR S10 THE FRAME IS 2 PEICES WELDED TO GATHER THERE ARE 2 DIFFIRNT FRONT FRAME HALFS 4WD AND 2WD JUST SAPARATE THE TO HALFS AND PUT THE 4WD HALF ON YOUR FRAME AND THEN SWITCH THE REAR END FROM THE 4WD TO THE 2WD AND YOU HAVE A 4WD
The front wheel and hub bearing assemblies on a 1999 Chevrolet Blazer 4.3L are different depending on 2 or 4WD. The GM part# for the front 2WD is 15731627, and AC Delco FW127 for the 4WD. The real axle wheel bearings are also different and depend on the ring gear size of the differential.
Chevrolet K series answer C designates 2WD as in C1500 = 2WD 1/2 ton K designates 4WD as in K2500 = 4WD 3/4 ton -tweek
2 door or 4 door?
The 2003 Chevrolet Blazer OBD 2 port is on lower edge of dash; right of parking brake pedal
A 1999 Chevrolet Blazer 2 dr fuel tank holds 19 US gallons.
The Chevy Blazer with a 4.3l engine has a firing order of 1-6-5-4-3-2. The number one cylinder is on the driver side closest to the front of the Blazer.
The 1997 Chevrolet Blazer OBD 2 port is on lower edge of dash; right of parking brake
The firing order for a 1996 Chevrolet S10 Blazer is 1, 6, 5, 4, 3, 2. The number one cylinder is on the front right as you face the engine.
The front track of the 2005 Chevrolet Impala is 5 ft. 2 in. (62 in.).
10 degrees
The gross weight for a Chevy Blazer 2 door 4x4 is 5300 pounds. The Chevy Blazer was produced from 1983 to 2005.