Want this question answered?
there is a harness that connects the speakers, the stereo and any power (extras bought) in a single bunch. most stereo kits make adapters that fit on the back of an aftermarket stereo so you don't have to cut the harness. however, it is a tight fit behind the stock stereo because of a plastic backing built into the dash. recommend to not cut the harness and find a way to fit it all (adapter, new stereo harness, stock harness) into the space provided.
To change car stereos, you will need to remove the bezel or cover from the stereo in the vehicle. Then, pull the stereo out of the dashboard and remove the wiring harness. You can then attach the new stereo to the harness.
Attached the wiring harness and the antenna cable to the back of your stereo. Slide the stereo into the stereo slot. Tighten the stereo with the stereo retaining screws.
Go to your local Canadian tire and buy a plug that goes from stereo harness to your stock harness!
I have a Lincoln VII LSC installing a Jensen stereo, have one harness with amplifie. I need the diagram on the color codes for the wires to the stereo and the harness #CK-WHFD2
i got the harness to use my ipod in my '03 focus, but i dont know how to make the stereo recognize it. Help!?
The best thing to do is to buy a wiring harness for your car and new stereo. These are readily available on eBay from $15. Just search for 'stereo wiring harness'.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out. Remove the wiring harness and the antenna cable.
Begin by removing the decorative cover to your stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out and remove the wiring harness and the antenna cable.
Connect the wiring harness to the back of your 1995 Buick LeSabre stereo. Secure the stereo with the stereo retaining screws.
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.