93-97 are the same
Should be the same as my 94, pretty much directly in front of the driver. Held on by 3 bolts.
Green
.040
The bolts on a 94 Dodge Intrepid valve cover need to be very tight. You should tighten to 12 N*m or 105 inch pounds.
I have the same problem, I don't know what to do.
how do you program a keyless remote for a 94 Dodge Intrepid. I battery died and now the horn keeps going off
faulty fuel filter or seal on filter not sealing
I put Warn locking hubs on my 94 bronco(was shift on the fly)..should be the same on the F-150 for 94. Mile marker makes good ones as well.
If the same as my 94 Intrepid with the 3.3, it should be held on by 3 bolts, jack up drivers side of car, disconnect battery, unbolt, the starter shouldn't fall out, but make sure it comes out slow, and you disconnect the positive connection as well as the clip on piece that goes to the solenoid. Easy as pie.
check the light bulb same double element bulb for both lights
TO REMOVE A BROKEN DIP STICK USE NEEDLE NOSE PLIERS OR A MAGNET.
Jackson is located right off I-94; Mile Marker 138. Jackson is West of Ann Arbor.