No, it can be on a circuit with conventional outlets.
If your spa is connected with a GFCI circuit breaker you will not need the GFCI receptacle.
I don't know if you are trying to ask if you can run a 240V panel off a GFCI or run a 120 V sub panel off of a GFCI. Can you clarify please,,,Thanks
A "GFCI" is a ground fault circuit interrupter. For more information see the link below.
No they must be seperated.
In a word NO, that will not cause either GFCI to trip. The correct term is GFCI (Ground Fault Circuit Interrupter)
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
If your spa is connected with a GFCI circuit breaker you will not need the GFCI receptacle.
Yes, you install a GFCI on a 2 wire circuit.
Deoends on code you are governed by. In USA, a GFCI outlet or a circuit controlled by a GFCI circuit breaker would be required.
No, you could use a GFCI circuit breaker instead.
The term GFCI stands for Ground Fault Circuit Interrupter.
I don't know if you are trying to ask if you can run a 240V panel off a GFCI or run a 120 V sub panel off of a GFCI. Can you clarify please,,,Thanks
Your question is a bit vague, but let's try a two part answer. If you have a GFCI breaker in an electric panel you should only have one connection at the breaker, but the breaker will protect all devices on the circuit. If you are talking about a GFCI outlet, they are equipped to extend the GFCI protection to other non-GFCI outlets by using the proper "output" connection on the GFCI.
A "GFCI" is a ground fault circuit interrupter. For more information see the link below.
No they must be seperated.
Connect incoming power to the line side of GFCI outlet and plug Jacuzzi into the outlet. Must be on a dedicated circuit. If it has a pump and heater then each one must be on dedicated GFCI protected circuit.
This article explains it in detail: Learn How To Safely Install a GFCI Outlet at The Home Depot