Yes and it may have 2 flasher relays. I could tell you if you had listed the year.
I have a 1996 Sunfire and the 4way flasher is located on the top of the steering column.
To replace the turning signal flasher on a 2004 Pontiac Sunfire, first, locate the flasher unit, which is typically found under the dashboard near the steering column. Remove the old flasher by pulling it straight out of the socket. Insert the new flasher into the socket, ensuring it is securely in place. Finally, test the turn signals to confirm they are functioning properly.
There is no relay. The flasher in under the dash on the left of the steering column
under dash drivers side mounted above the brake pedal
In a 2003 Pontiac Sunfire, the flasher relay is typically located under the dashboard, near the steering column. You may need to remove a cover panel to access it. It can also be found in the fuse box, which is usually located on the driver's side of the vehicle. Always refer to the owner's manual for the exact location and identification of the relay.
Remove the panel under steering wheel. There will be 2 flashers. Replace one on right.
check your fuses first, then check your bulbs and then your relay.
where is the starter located on 2005 pontiac sunfire
On a 1998 Pontiac Sunfire, the turn signal flasher is typically located under the dashboard, near the steering column. You may need to remove the lower dash panel or look up behind the steering wheel to access it. The flasher is usually a small, cylindrical component that plugs into the fuse box or a separate relay socket. If you’re having trouble locating it, consulting the vehicle’s manual can provide more specific guidance.
how to check fuse for horn in a 1998 Pontiac sunfire
Well, if none of them work, (front or back) I'd suspect a fuse or the flasher. Do the 4 way emergency lights work? If so, they operate on a separate flasher and this would indicatethat the turn signal flasher is bad.
On a 1996 Pontiac Sunfire, the hazard light flasher is typically located on the dashboard, near the center console. You can activate it by pressing the red triangular button marked with a hazard symbol. If you're having trouble locating it, check the owner's manual for a diagram or more specific information.