Yes, when facing printed side up, it is the larger slot to the left.
This Slot is use to insert small sized Memory Chips(SSD- Solid State Device), Which are firstly inserted into an adapter then ti inserted into Adapter Slot.
It's in the back of your xbox 360.
yes
Adapter Slot
AMR
If you are refering to SD Card adapter, there are the following methods. If the adapter uses USB, then attach it to a USB port. (common) If the adapter converts to firewire, plug it into a firewire port. (uncommon) If it adapts mini/micro SD to SD, then slot it into a SD Card Slot.
Yes, as long as your Epson projector has an HDMI slot, or if you use an HDMI-to-VGA adaptor (an HDMI-to-RCA Video adaptor can work as well).
When the Xbox 360 first came out, there was no HDMI slot at all. After the release of the Elite (black Xbox 360), they introduced HDMI. After that, I believe all Xbox 360's was introduced with the slot. Basically, if you have the first Xbox 360 then no.
The expansion slot is the socket on the motherboard that can hold an adapter card. There are different types of expansion slots (pci, pcie, pciex16) so you need to check that the expansion is the same kind as the adapter card.
The HDMI cable should be plugged in to an HDTV. If you have a Laptop or PC with a HDMI plug slot on it is also so it can be plugged in to a HDTV and is an out HDMI PLUG SLOT like the one that is on the PS3. Some HDMI cables that are sold are of low quality and do not work, stick with brand name cables that are not purchased from highly counterfeit sources in overseas locations.
Yes of course, it's in the specification for HDCP.
You don't need the adaptor ! The Corby has a micro SD card slot. Simply insert the micro SD card into the slot, and you're all set. The adaptor is only needed if you want to use the micro card in a normal SD slot. In which case, you insert the card into the adapter - and slide the adapter into the full-size slot.