In general, screws are stronger than nails of similar size. In other words, it is much easier to pull out a nail than a screw. Not all carpentry jobs require that degree of strength, however, so sometimes it is perfectly appropriate to use nails. I would have to know what you are building, to say if you should be using screws or nails. Nails, of course, are easier to install, and also less expensive, so for some jobs that are better.
A screw holds better than a nail.
A screw holds wood together better than a nail because the threading of a screw provides a horizontal grip on the wood. Nails are driven down into wood and have nothing but the pressure of the wood to keep them attached, which means it is easier to pull a nail straight out of a board than a screw.
efehgsdbfjhgsdjhbvcshgdfhcgvasgfdcjhdgfgasfda
because the threads hold them into place while as a nail works its way out at a point of time !
You can, but it is usually better to drill and screw something than to nail it. It will hold much better. You can use a power shot that shoots the nail in with a 22 cal. blank. You can use concrete nails and drive them in by hand.
A screw has an irregular shape, and has more to stop it from falling out. Also, A screw has an advantage because it's drilled in and the spirals makes it stick in faster and doesn't take long as a nail to hammer it.So, it takes a few seconds to screw the screw in.
A screw holds wood together better than any nail because it resists being pulled out much better. A screw is also easier to remove without damage. However, screws are more expensive to make and take longer to put in, so nails are still used in a lot of timber work.
Yes they do because a screw has an inclined spiral wrapping around it, which when "Screwed" into something, has a greater grip than a nail
nails can slip, under too much force. But screws are in a 'screw shape' lol. so can withstand alot of pressure/ force.
Screws are a more secure fastening than nails because the only barrier to removing a nail is the friction of the sides of the nail against the wood, so it can be pulled loose by a simple torsion force. A screw, however, has threads, so a torsion force cannot remove a screw without destroying part of the wood in the process.
a screw possesses both rotational kinetic energy and translational kinetic energy while a nail possesses only translational kinetic energy as it moves through the piece of wood hence the screw moves faster since its motion is backed by more energy than the nail.
A screw driver is more high-tech than a regular nail driver or hammer. A screw is a more holding tool than a nail. It has metal ridges around it to hold it in place. A screwdriver is used for putting a screw in an area to fastening to objects and/or parts together