It can, if there's another source of sound nearby, vibrating at the natural frequency
of the tuning fork.
Example:
Two Tuning Forks with the same natural frequency. The first one can be set vibrating
by whacking it against the edge of the table, whereupon the second one will vibrate
because it resonates with the first one.
ya...the tuning fork was vibrating and different rating forks are available.eg:-512 vibrations/sec.
actually,the sound was produced due to the phenomenon known as RESONANCE.
The some wave has the same frequency as the natural frequency of the tuning fork, the tuning fork is made to vibrate due to a process called resonance.
harmonic resonance
Resonance
If there is resonance, then making one vibrate will also make the other one vibrate in a noticeable way, since:* The vibrations are transmitted through the air, and * Any such small effect is reinforced, over time, due to resonance.
The resonance occurs by the frequent vibrations from the two objects. Since hitting tissue paper which is not a very rigid object does not vibrate it does not resonate.
The some wave has the same frequency as the natural frequency of the tuning fork, the tuning fork is made to vibrate due to a process called resonance.
harmonic resonance
When a tuning fork vibrates over an open pipe and the air in the pipe starts to vibrate, the vibrations in the tube are caused by resonance.
Vibrations are transferred from one to the other through the air. If the two have the same frequency (or a very similar frequency), resonance will occur.
Resonance
If there is resonance, then making one vibrate will also make the other one vibrate in a noticeable way, since:* The vibrations are transmitted through the air, and * Any such small effect is reinforced, over time, due to resonance.
The resonance occurs by the frequent vibrations from the two objects. Since hitting tissue paper which is not a very rigid object does not vibrate it does not resonate.
That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.
Yes. It's an effect called 'resonance' - two identical things can vibrate in synch if the vibrations of one can someone pass to the other. The usually way of doing this is to stand them both on the same surface, so that the vibration can pass through that object.
The characteristics that determine the frequency with which a tuning fork will vibrate are the length and mass of the tines.
The vibrations are caused by resonance.beatsresonanceThe vibrations that are set up in the second fork are called sympathetic vibrations, and the two forks are said to be in resonance.
300Hz is the natural frequency of the tuning fork hence if a sound wave of same frequency hits the fork then RESONANCE occurs