0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are examples of wetting and drying?
Wetting: humidification of conditioned air, humidification of clothes during a rain, etc. Drying: deleting water from humid sand, deleting water from humid dishes, etc.
Why does a clean air system save money?
It helps because if you dry your dishes in a dishwasher then that will go on your electricity bill.But air drying will help you save money and energy.
What is sun drying air drying?
what are the example of sun and air drying
What is condensing drying in a dishwasher?
Residual heat drying - one of the best hygienic performance solutions to dry dishes because it avoids the use of air from outside the dishwasher.(Source: Product description for Bosch SGS4502GB dishwasher)SG
What is safe reliable method of drying the crystals?
You can use air drying, an oven or an exsicator.
Does Egyptian cotton shrink?
Yes, Egyptian cotton can and does shrink. In order to avoid this, make sure you do not watch your Egyptian cotton in hot water. You also will want to allow the cotton to air dry and avoid using a drying machine.
Why isn't my white air drying clay drying?
I have no clue, I suggest you buy another brand.
What is sun and air drying?
Tung unu !!
What has the author E Hausbrand written?
E. Hausbrand has written: 'Drying by means of air and steam' -- subject(s): Tables, Equipment and supplies, Textile fabrics, Drying, Steam, Air 'Principles and practice of industrial distillation' -- subject(s): Distillation 'Drying by means of air and steam' -- subject(s): Air, Drying, Drying apparatus, Equipment and supplies, Steam, Tables, Textile fabrics 'Evapourating, condensing and cooling apparats'
Can you save wet books?
Yes, wet books can be saved by carefully drying them out. The best method is to interleave absorbent paper between the pages and lay the book flat to air dry. Avoid using direct heat or sunlight, as this can damage the pages.
What are the different types of seasoning timber?
Seasoning of timberSeasoning is the name given to the methods of drying timberThere are two methods by which timber can be dried:(i) natural drying or air drying, and(ii) artificial drying.Air dryingAir-drying is the drying of timber by exposing it to the air. The technique of air-drying consists mainly of making a stack of sawn timber (with the layers of boards separated by stickers) on raised foundations, in a clean, cool, dry and shady place. Rate of drying largely depends on climatic conditions, and on the air movement (exposure to the wind). For successful air-drying, a continuous and uniform flow of air throughout the pile of the timber needs to be arranged. Coating the planks with any substance that is relatively impermeable to moisture can control the rate of loss of moisture; ordinary mineral oil is usually quite effective. Coating the ends of logs with oil or thick paint, improves their quality upon drying. Wrapping planks or logs in materials, which will allow some movement of moisture, generally works very well provided the wood is first treated against fungal infection by coating in petrol/gasoline or oil. Mineral oil will generally not soak in more than 1-2 mm below the surface and is easily removed by planning when the timber is suitably dry.Natural seasoning of timberKiln dryingThe process of kiln drying consists basically of introducing heat. This may be directly, using natural gas and/or electricity or indirectly, through steam-heated heat exchangers, although solar energy is also possible. In the process, deliberate control of temperature, relative humidity and air circulation is provided to give conditions at various stages (moisture contents or times) of drying the timber to achieve effective drying. For this purpose, the timber is stacked in chambers, called wood drying kilns, which are fitted with equipment for manipulation and control of the temperature and the relative humidity of the drying air and its circulation rate through the timber stackKiln drying provides a means of overcoming the limitations imposed by erratic weather conditions. In kiln drying as in air drying, unsaturated air is used as the drying medium. Almost all commercial timbers of the world are dried in industrial kilns. A comparison of air drying, conventional kiln and solar drying is given below:1. Timber can be dried to any desired low moisture content by conventional or solar kiln drying, but in air drying, moisture contents of less than 18% are difficult to attain for most locations.2. The drying times are considerably less in conventional kiln drying than in solar kiln drying, followed by air-drying.1. This means that if capital outlay is involved, this capital is just sitting there for a longer time when air-drying is used. On the other hand, installing an industrial kiln, to say nothing of maintenance and operation, is expensive.2. In addition, wood that is being air-dried takes up space, which could also cost money.3. In air-drying, there is little control over the drying elements, so drying degrade cannot be controlled.Air-drying is the drying of timber by exposing it to the air. The technique of air-drying consists mainly of making a stack of sawn timber (with the layers of boards separated by stickers) on raised foundations, in a clean, cool, dry and shady place. Rate of drying largely depends on climatic conditions, and on the air movement (exposure to the wind). For successful air-drying, a continuous and uniform flow of air throughout the pile of the timber needs to be arranged. Coating the planks with any substance that is relatively impermeable to moisture can control the rate of loss of moisture; ordinary mineral oil is usually quite effective. Coating the ends of logs with oil or thick paint, improves their quality upon drying. Wrapping planks or logs in materials, which will allow some movement of moisture, generally works very well provided the wood is first treated against fungal infection by coating in petrol/gasoline or oil. Mineral oil will generally not soak in more than 1-2 mm below the surface and is easily removed by planning when the timber is suitably dry.Natural seasoning of timberKiln dryingThe process of kiln drying consists basically of introducing heat. This may be directly, using natural gas and/or electricity or indirectly, through steam-heated heat exchangers, although solar energy is also possible. In the process, deliberate control of temperature, relative humidity and air circulation is provided to give conditions at various stages (moisture contents or times) of drying the timber to achieve effective drying. For this purpose, the timber is stacked in chambers, called wood drying kilns, which are fitted with equipment for manipulation and control of the temperature and the relative humidity of the drying air and its circulation rate through the timber stackKiln drying provides a means of overcoming the limitations imposed by erratic weather conditions. In kiln drying as in air drying, unsaturated air is used as the drying medium. Almost all commercial timbers of the world are dried in industrial kilns. A comparison of air drying, conventional kiln and solar drying is given below:1. Timber can be dried to any desired low moisture content by conventional or solar kiln drying, but in air drying, moisture contents of less than 18% are difficult to attain for most locations.2. The drying times are considerably less in conventional kiln drying than in solar kiln drying, followed by air-drying.1. This means that if capital outlay is involved, this capital is just sitting there for a longer time when air-drying is used. On the other hand, installing an industrial kiln, to say nothing of maintenance and operation, is expensive.2. In addition, wood that is being air-dried takes up space, which could also cost money.3. In air-drying, there is little control over the drying elements, so drying degrade cannot be controlled.
Is radiation drying your roots over a hot air vent?
no it is not
