The use of any connector is dependant on the equipment so to answer the question, we will assume that it refers to a television. Most modern televisions have a selection of different inputs and are normally marked as AV 1, AV 2 and so on. They are likely to be different types of input but once again, that is dependant on the model. If the connectors are on an AV amplifier it is possible that they are outputs rather than inputs. If there is any doubt, it is important that you read the manual to find out before making connections.
All you need is a TV tuner card that has "AV in" facility. From your Set Top Box connect the AV cord to your AV in port of your TV tuner card and you are done.
The configuration of an audio receiver can be a daunting task, given the complexity of modern equipment. Fortunately, however, most modern receivers have an interface that will allow you to configure the equipment via the TV screen. If you are still nervous about doing this your local AV dealership will be happy to set the equipment up for a fee.
u have to use your ps3 av multi out cable
its technical compuers and wiring
check first your satellite receiver if there is an HDMI jack. connect your HDMI cables from your satellite receiver to your tv tuner. if you don't have the HDMI jack, check the AV output jack. connect the AV cables from your satellite receiver to your tv tuner. you can use either AV or HDMI.
On some TVs their are another set of AV inputs in the back of the TV (or front if you are using the back). So look closely around the back. Otherwise you will have to unplug whats there.
AV Club - 2006 TV was released on: USA: 16 September 2006 (New York Television Festival)
Get your Audio out Cables coming out of the Xbox360 and plug them into your AV-in on your stereo instead of the AV-in on the TV. Tune your Stereo to AV-in Input and you're sorted.
the AV button
This depends on where you plug it in.Nearly all TVs have an 'AV' setting somewhere, and 'AV' jacks on the back or sides of the TV. If you plug your Wii's AV cable directly into those, just set your TV to the 'AV' channel when you want to play.If your TV has more than one AV channel, it'll say somewhere on the TV next to those jacks which one to use, or just try all of them.If you use a component cable with five leads, select the 'Component' channel.
AV input is a common label on a connector to receive (AV) audio/visual signals from electronic equipment that generates AV signals (AV output). Audio video output is one of the most important connectors which output both audio and video signals from the electronic equipment. You can pay attention to the user manual of the electronic equipment you have bought from a well-known brand on online.