Yes, chlorine can clean any water when used in the appropriate manner
To chlorinate a well properly for safe and clean water supply, first, determine the correct amount of chlorine needed based on the well's depth and diameter. Next, mix the chlorine with water and pour it into the well. Allow the chlorine to circulate by running the water from all faucets until you can smell the chlorine. Let the chlorine sit in the well for at least 12 hours, then flush the system by running the water until the chlorine smell is gone. Test the water to ensure it is safe for consumption.
Never put Muriatic into a Well; for any reason. If you want to disinfect your Well; use Chlorine or regular laundry unscented Bleach.
You would need to install a water filtration system that also removes Chlorine from the water. Well water normally does not have chlorine it it so the source of the contamination would need to be determined and removed, or a new well drilled.
Water cleans things by acting as a solvent that dissolves dirt, grease, and grime. When water is combined with detergents or soaps, it helps to loosen and wash away particles from surfaces. The physical force of water flowing or being rubbed against surfaces can also dislodge and remove dirt.
The chlorine content in well water can vary depending on a few factors such as the treatment method used, the presence of contaminants, or any natural sources of chlorine. In general, well water does not naturally contain chlorine unless it has been treated with chlorine for disinfection purposes. Testing the well water can provide more accurate information on the chlorine levels.
Chlorine is commonly used as an element to clean and disinfect water in pools, as well as surfaces in households and healthcare settings. Its oxidizing properties help to kill bacteria and viruses.
To effectively remove chlorine from well water, you can use a carbon filter or a reverse osmosis system. These methods can help to reduce or eliminate chlorine, improving the taste and quality of your water.
The type of water that contains the lowest amount of chlorine is spring bottled water. Normally it contains no or little chlorine.
well clean water can be used for drinking and household purposes.
To clean deep well water, you can use a water filtration system specifically designed for well water, such as a sediment filter, activated carbon filter, or reverse osmosis system. Regular maintenance and testing of the water quality are also important to ensure the effectiveness of the cleaning process. Additionally, consider consulting a water treatment professional to determine the best cleaning methods for your specific water quality issues.
Only well adapted animals that live in the water like fishes but chlorine is not drinkable
The quickest and cheapest way to clean that up is....DUMP IT and start over. Scrub down the inside with some bleach in the water or scrub spots with baking soda and water paste. Rinse well and refill. Be sure to put chlorine in the water along with some algacide. Also make sure that you have a clean filter.AnswerAlso be sure to test water three times a week or more if you use it alot. Alkinity and pH affect how well the chlorine works. Also the sunlight can use up all the sanitizer in 2 hours, so check that as well. Use a stabilized chlorine to help slow down the sun using it up. A granular or liquid chlorine is the fastest way to make sure it is safe to swim. Don't use bleach for laundry, because the pH is too high, use approved swimming chlorine treatments.