0
Faraday's Law: the E.M.F. induced in a conductor [the current is caused by the E.M.F.] is directly propotional to the rate of change of magnetic flux linkage.
A constant magnetic flux isn't changing, so the rate of change is zero and the induced E.M.F is zero. No E.M.F. = no current.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Does a coil carrying electric current create a magnetic field?
No, The magnet rotates/moves through the coil, inducing a current into the coil by disturbing the coils magnetic field. A transformer works the exact same way.
Why there is an induce current in a coil when a coil is compressed in a magnetic field?
compressing a coil in a magnetic field means that there is a relative movement of the the said coil existing in a magnetic field, hence current will be induced. induction law.Another Answer'Current' is not induced into a coil. It's voltagethat's induced; if the coil forms a closed loop, then current will flow; if there is no closed loop, then no current will flow.The induced voltage results from either a change in current through the coil, or from the relative movement between the coil and an external magnetic field.
What is the principle of electomagnetic induction?
What? whenever a magnetic flux linked with the coil changes an emf induce in the circuit..
Can a magnet create electricity?
yes, when a copper wire is coiled around it and attached to a battery, an electrical current passes through it. =============================== The above is not the apt answer for the query made. Yes when a magnet is moved through a coil of wire then current is induced in it. This phenomenon is known as electro magnetic induction and current is known as induced current. This is because of change of magnetic flux linked with the coil. So whenever there is a change in magnetic flux linked with a closed circuit then current is induced in the circuit. The current lasts so long as there is change in magnetic flux. Just link of magnetic flux will not induce any current. Only the change of magnetic flux does everything. This is very very important.
Is the process of producing an electric current by moving a loop of wire through a magnetic field?
A current is induced in the conductor by the moving magnetic field (relative to the wire, the field is moving) I guess induction might be the term you are looking for.Another AnswerMoving a magnet through a loop of wire will induce a voltage, not a current, into a coil. If the coil forms a closed loop, then a current will result. But it's a voltage that's being induced, not a current -the current is merely the result of that voltage.
Can magnets produce electric currents?
Motion of a coil within a magnetic field will induce a current in the coil if it can complete a circuit.
What are the different ways to induce current in a coil?
Different ways to induce current in a coil are as given below:(1) If a magnetic field is changed round a coil then an induced current is set up in the coil. It can be done by taking a bar magnet and bringing it closer to the coil or taking it away from the coil.(2) If a coil is moved in a magnetic field, then again an induced current is set up in the coil.(3) If a coil is rotated in a uniform magnetic field, it may also cause an induced current in the coil.(4) If we take two coils and insert them over a non conducting cylindrical roll then on changing current flowing in one coil, an induced current is obtained in the other coil.CommentYou don't induce a 'current' into a coil; you induce a voltage. If that coil is open circuited, then no current will flow. If, on the other hand, the coil is connected to a load, or its opposite ends short-circuited, then the induced voltage will cause a current to flow. Remember, current will only flow if there is a load, or short circuit, and the value of the current will depend upon the value of the induced voltage and the resistance of the load or short circuit.
Define the term induced current?
a current can be induced by changing the area of a coil in a constant magnetic field. By Faraday's Law: the induced current is proportional to the rate of the change of flux in a loop of wire. With magnetic flux being defined as the product of the magnitude of the magnetic field and the area of the loop. The direction of the current is found from Len's Law: The induced current produces an induced magnetic field that opposes the change of flux causing the current.CommentYou don't induce a current, you induce a voltage. And Faraday's Law states that the induced voltage, not current, is proportional to the rate of change of flux! If the coil is open circuited, a voltage is still induced into the coil but no current will flow. For current to flow, the coil must be connected to a load (or short circuited), and this current is dependent upon the values of the induced voltage and the resistance of the load.
Does a coil carrying electric current create a magnetic field?
No, The magnet rotates/moves through the coil, inducing a current into the coil by disturbing the coils magnetic field. A transformer works the exact same way.
What are two ways to cause a current in a wire coil?
Different ways to induce current in a coil are as given below:(1) If a magnetic field is changed round a coil then an induced current is set up in the coil. It can be done by taking a bar magnet and bringing it closer to the coil or taking it away from the coil.(2) If a coil is moved in a magnetic field, then again an induced current is set up in the coil.(3) If a coil is rotated in a uniform magnetic field, it may also cause an induced current in the coil.(4) If we take two coils and insert them over a non conducting cylindrical roll then on changing current flowing in one coil, an induced current is obtained in the other coil.CommentYou don't induce a 'current' into a coil; you induce a voltage. If that coil is open circuited, then no current will flow. If, on the other hand, the coil is connected to a load, or its opposite ends short-circuited, then the induced voltage will cause a current to flow. Remember, current will only flow if there is a load, or short circuit, and the value of the current will depend upon the value of the induced voltage and the resistance of the load or short circuit.
Where do electric generators direct the current they induce?
An electric generator generates the current by moving a coil of wire through a magnetic field. This is normally in the inner mechanisms of the device.
Why a double coil transformer does not work on a pure DC voltage source?
According to Faraday's Law only if there is change in flux linkage of a conductor then current is induced between mutual inductors. Now DC will induce a constant a constant flux in the transformer core, consequently in the secondary coil. So constant flux cannot induce a current in the secondary. SUBHRA JYOTI SAHA
How eddy current changes the coil resistance and impedance?
When an AC generator provides an alternating current to the coil will induce the magnetic filed around it. This is called primary magnetic field. The impedance is nothing but the opposition to the current flow. The coil will have resistance as well as inductance. When this coil is brought to near any conducting material, due to the primary magnetic filed the eddy currents will develop in the material. The magnetic filed which will induce in the material is called secondary magnetic field due to the eddy current secondary magnetic field will try to oppose the primary magnetic field due to any change in the eddy current pattern. Once primary magnetic filed gets affected in the coil definitely there will be a change in impedance in terms of resistance and inductance.You can think of eddy currents as current flowing in the wrong direction (across laminations in transformers, for example). This energy is effectively lost, causing a higher loss, increasing the resistance. Eddy currents will have a minimal effect on impedance, since this is typically much larger than the resistance (note impedance is the resistance and reactance of the coil, reactance will typically dominate).
What is a magnetic created when electric current flows through a coil of wire?
Nothing is ever created, however, Electricity is INDUCED. The process is interchangeable, so if you pass a current through the wire you have a magnetic field (electromagnetism)lol.-originalposter- When you pass a magnet through a coil of wire, you induce an electric current. Also, if you move the coil instead you get the same result.-norman
Can a transformer work with d.c.?
The primary coil has to induce current in the secondary coil. The only way this can happen is if there is a varying magantic field in the primary which then will induce a varying mag field in the secondary which results in a current in the sec. Only varying current can induce a varying mag field only a varying mag field can induce current So you need a varying current in the primary. D.C. is not a varying current so it cannot induce a mag field in the coil. A.C. (it does not have to be +/- it just has to be varying) can do so.
Why there is an induce current in a coil when a coil is compressed in a magnetic field?
compressing a coil in a magnetic field means that there is a relative movement of the the said coil existing in a magnetic field, hence current will be induced. induction law.Another Answer'Current' is not induced into a coil. It's voltagethat's induced; if the coil forms a closed loop, then current will flow; if there is no closed loop, then no current will flow.The induced voltage results from either a change in current through the coil, or from the relative movement between the coil and an external magnetic field.
Is flow of induce current necessary when induce emf is being produce?
There is no such thing as an 'induced current'. Voltages are induced, not currents. If a voltage is self-induced into a coil, then that voltage will oppose any change in current. If a voltage is mutually-induced into a separate coil, no current will flow unless that coil is connected to a load.
