Yes, they do.
There are either eight or ten bolts on the head of Jinma tractor. The torque bolts require 95 to 105 foot pounds.
what is the torque head specs for a 3 cylinder diesel yanmar motor in a gator 6/4
65 ft./lbs.
what is the torque for the rear crankshaft cap and flywheel bolts on a ferguson tea.
what is the torque on the head bolt and sequence for a ford 3000 diesel engine.
The caliper mounting bolts, both in the front and in the rear, require 39N-m, or 28.9 ft-lbs of torque.
It depends on the diameter of the flange, the type of pipe, the materials, the type, size and grade of bolts, type, grade and size of the flange, and the pressure and temperature of the fluid transported in the pipe. Some pipe flanges require very little torque on their bolts while others need as much as 500 foot-pounds of torque, or more. The design and application will determine the required torque.
the correct torque for these bolts is as follows: 96lbs
10mm bolts torque to 18 Ft-lbs 12mm bolts torque to 22 Ft-lbs
Front caliper mounting bracket bolts torque to 57ft-lbs Front caliper pin bolts torque to 27ft.lbs Rear Caliper mounting bracket bolts torque to 38ft-lbs Rear caliper pins torque to 15ft-lbs
torque specifications
torque for 2c engine cylinder head bolts