Want this question answered?
The effect of diode voltage drop as the output voltage is that the input voltage will not be totally transferred to the output because power loss in the diode . The output voltage will then be given by: vout=(vin)-(the diode voltage drop).
because of its losses i.e iron and copper losses. since iron loss depends on voltage (v)and copper loss depends on current(i).
Yes, that is almost true, apart from a very small copper loss in the primary winding that carries the small magnetising current. The core loss (iron loss) depends on the applied voltage. This loss is measured by the open-circuit test, carried out at the working voltage.
Power = voltage times current 7.2 volts * 24 amperes = 172.8 watts
It doesn't, really. The power loss in transformers is broken down into copper loss and iron loss. The copper loss comes from the resistance of the windings in the transformer and depends on the load current, while the iron loss in the magnetic core depends on the magnetic flux density and is constant if the supply voltage is constant.
voltage drop is the loss or drop that occured across the element so that voltage gets down and current increases across the element and power loss is like i2r loss and like wastage of power without consuming
The effect of diode voltage drop as the output voltage is that the input voltage will not be totally transferred to the output because power loss in the diode . The output voltage will then be given by: vout=(vin)-(the diode voltage drop).
A splice has a minor additional resistance associated with it, but the main reason for voltage drop will be length. The smaller the wire diameter, the higher the resistance per unit length. The type wire such as stranded or solid or copper and aluminum also contribute to voltage loss in various ways.
the formular notation for voltage drop is Ed Another possible term is "IR loss" meaning the current (I) x resistance (R) loss on the wire part of a circuit
because of its losses i.e iron and copper losses. since iron loss depends on voltage (v)and copper loss depends on current(i).
When the power (energy) is dropped to the value of 50 percent, the decibel loss is 3 dB, but the voltage is dropped to the value of 70.1 percent. Power drop to 50 % means -3 dB; that is 70.1 % voltage drop. Power drop to 25 % means -6 dB; that is 50 % voltage drop.
Copper losses are purely voltage-drop losses (I squared R) caused by the resistance of the windings, as opposed to hysteresis losses and eddy current losses (so-called iron losses), which are magnetic in nature. They are called copper losses whether the winding conductors are made of copper or not, by the way.
Yes, that is almost true, apart from a very small copper loss in the primary winding that carries the small magnetising current. The core loss (iron loss) depends on the applied voltage. This loss is measured by the open-circuit test, carried out at the working voltage.
To avoid voltage drop in the coil.
It is the supply voltage divided by the rotor resistance including the resistance of the brushes.
With the minor voltage loss in the wiring, the voltage drop across a single appliance is the total voltage in the circuit, and doesn't change when more devices are added in parallel.
Power = voltage times current 7.2 volts * 24 amperes = 172.8 watts