Of course it does without one the only way to start the engine would be to push it. Anyone that does not know the answer to this should not be driving they may just about be able to walk around but should not drive.
i dont know how to fit a stater moter!!
For a Peugeot 306 Miami, the starter motor typically used is a 1.9L diesel or a 1.6L petrol variant, depending on the engine configuration. It's essential to verify the engine type and year of manufacture to ensure compatibility. Generally, a Bosch or Valeo starter motor is a common choice for replacements. Always consult your vehicle's manual or a professional mechanic for precise specifications and recommendations.
The starter motor on a Peugeot 306 TD is located on the lower side of the engine, near the transmission. It is typically mounted to the engine block, just above the bell housing. To access it, you may need to lift the vehicle and remove any protective covers or components that obstruct the view. Always ensure the battery is disconnected before attempting any repairs.
Turn your headlights on and try start the engine, if they don't dim then the problem is still in the starter motor. If you bought the motor 2nd hand, maybe try exchanging it or check it has been refitted properly. Ive currently got the same problem with my xsi, bu haven't had a chance to fit a new one because of the weather here. When you replaced the starter did you also replace the starter solenoid? I had the same symptoms on my 306, starter wouldn't turn, battery was OK and headlights worked. Road service was able to start the car by bypassing the starter solenoid. I replaced the solenoid (and the starter because they're sold together) and fixed the problem.
The starter motor is at the rear of the engine.
The starter motor is at the rear of the engine.
You can find the starter on the right hand side of the motor. The starter will be near the back of the motor. You can follow the positive battery cable to the starter.
Which model is it, year etc. on a 95 pug 306 XL 1.4 its quite difficult to get at ( im trying to change mine now) if you look at the rocker cover (top of the engine) its towards the cockpit at the back of the engine on the right. an easier way to find it is to follow the leads off of the battery one should go behind the engine and to the starter
Which connects starter motor and the battery temporary to get sufficient power to starter motor.
It starts the motor.
To replace the starter motor on a Yamaha Kodiak 400 ATV, first disconnect the battery to ensure safety. Remove the starter motor cover and the old starter motor by unbolting it from the engine. Install the new starter motor in the same position, securing it with bolts, and then reattach the starter motor cover. Finally, reconnect the battery and test the new starter to ensure it functions properly.
how do i remove the starter motor Mazda rx8